operation manual

General description
A Supply hose
B Temperature light
C Temperature dial and indicator
D Steam activator and lock
- D1. Lock
- D2. Activator
E Cap of steam tank
F Iron stand
G Steam tank
H Mains cord
I Steam-ready light (GC6107 only)
J Steam tank switch with power-on light
K Steam control (GC6107/GC6104 only)
L Iron switch with power-on light
M 'Steam tank empty' light (GC6107 only)
N Soleplate
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗ Check if the voltage indicated on the bottom of the steam tank
corresponds to the local mains voltage before you connect the
appliance.
◗ Only connect the appliance to an earthed wall socket.
◗ Do not use the appliance if the plug, the cord or the appliance
itself is damaged.
◗ Regularly check if the mains cord and the supply hose are still
undamaged and safe.
◗ If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
◗ Do not put perfume, vinegar, starch, descaling agents, ironing aids
or other chemicals in the steam tank.
◗ Never leave the ironing system unattended when it is connected
to the mains.
◗ Never immerse the iron or the steam tank in water.
◗ Infirm persons should not be allowed to use the appliance
without supervision. Keep the appliance out of the reach of
children.
◗ The iron stand and the soleplate of the iron can become
extremely hot and may cause burns if touched. If you want to
move the steam tank, do not touch the stand.
◗ Always place the iron on the stand or on its heel. Do not put the
hot iron on the supply hose or the mains cord. Make sure the
mains cord and the supply hose do not come into contact with
the hot soleplate.
ENGLISH6