operation manual
16
Storage
1 Remove the plug from the wall socket.
2 Empty the water tank and let the iron cool down in a safe place.
3 Windthemainscordroundtheheeloftheapplianceandxitwith
the cord clip. Store the iron on its heel in a safe and dry place.
Troubleshooting
This chapter summarises the most common problems you could
encounter with the appliance. If you are unable to solve the problem with
the information below, visit for a list of
frequently asked questions or contact the Consumer Care Centre in your
country.
Problem Possible cause Solution
The iron is plugged
in, but the soleplate
is cold.
There is a connection problem. Check the mains cord, the plug and the
wall socket.
The iron does not
produce any steam.
There is not enough water in the
water tank.
Fill the water tank (see chapter ‘Using
the appliance’, section ‘Filling the water
tank’).
The iron is not hot enough to
produce steam.
Wait until the Smart light has stopped
ashing and lights up continuously.
You did not move the iron. This iron is equipped with a motion
sensor and starts producing steam as
soon as it is moved.
The iron is not plugged in. Plug in the iron to switch it on.
ENGLISH