operation manual

11
3 Remove the hangtag from the iron.
Using the appliance

Your appliance has been designed to be used with tap water. If you live in
an area with very hard water, fast scale build-up will occur. It is therefore
recommended to check the water hardness rst with the test strips
provided.
1 Dip the test strip in tap water for 1 second.
2 Shake the strip for 60 seconds.
3 Check how many squares on the test strip have changed colour and
compare with the details in the water hardness table below.

Squares with colour
change
Water hardness Advice
1
None Very soft water Use tap water
2
One Soft water Use tap water
3
Two Medium hard water Use mixture of 50% tap water and 50% distilled
water*
60 sec.
ENGLISH