User Manual

Ironable fabrics
1 Check whether the garment is ironable by reading the label on the garment (Fig. 1-3).
Do not iron non-ironable fabrics. Prints on the garment are not ironable either.
Steam settings
1 To change steam settings, tilt the iron up slightly (about 20 degree and more), and press steam
button on top of the handle (Fig. 1-5)
Note: All steam settings are equipped with OptimalTEMP technology and are safe to use on all
ironable fabrics.
- ( setting) (Fig. 1-6): enabled by the sensor, perfect amount of steam is produced
automatically when needed during movement of the iron. Steam stops when the iron is not moved
or put to vertical position.
It is recommended to use the setting for ultimate convenience on all garments.
- (MAX setting) (Fig. 1-7): maximum constant steam is delivered continuously for stubborn
creases. For best result on tough fabrics such as cotton, jeans and linen, it is recommended to use
the MAX setting. Steam stops when the iron is put to vertical position.
- (ECO setting) (specic types only) (Fig. 1-8): minimum constant steam is delivered
continuously for garments with less creases. This setting also saves energy. Steam stops when the
iron is put to vertical position.
- (ionic setting) (specic types only) (Fig. 1-9): deep and powerful ionic steam bursts are
produced for more hygienic ironing.
- (steam o setting) (Fig. 1-10): select this setting to iron without steam.
Tip: In any steam setting, you can press the steam button during ironing for more steam.
Auto shut-o
The safety auto-o function automatically switches o the appliance if it has not been used for
2 minutes resting on its soleplate or 8 minutes resting on its backplate. The display panel ashes to
indicate the appliance is at auto-o status.
To let the appliance heat up again, pick up the appliance or move it slightly. The display panel turns to
breathing and the appliance starts to heat up.
Cleaning and maintenance
For more information on how to performance clean and maintenance on the iron, refer to the videos
in this link : http://www.philips.com/descaling-iron.
Cleaning the soleplate
1 Unplug the appliance and let it cool down.
2 Pour any remaining water out of the water tank.
3 Wipe akes and any other deposit o the soleplate with a damp cloth and a non-abrasive (liquid)
cleaning agent.
Note: To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad,
vinegar or other chemicals to clean the soleplate.
Quick Calc Release (specic types only)
IMPORTANT: The Quick Calc Release automatically collects loose scale particles during ironing.
After 1 to 3 months of use, the Calc-Clean reminder light starts ashing to remind you to use the
Quick Calc Release function (Fig. 2-1). This is to remove scales collected from your iron to prolong its
life. When the Calc-Clean reminder light is ashing, the iron does not heat up.
8
English