operation manual

If you do not know what kind or kinds of fabric
an article is made of, determine the right ironing
temperature by ironing a part that is not visible
when you wear or use the article.
Silk, woollen and synthetic materials: iron the
reverse side of the fabric to prevent shiny patches.
To prevent stains, do not use the spray function.
Start ironing the articles that require the lowest ironing
temperature, such as those made of synthetic bres.
4 Settheappropriatesteamsetting(seethe
‘Temperatureandsteamsettings’tableabove).
Note: Make sure that the steam setting you select is
suitable for the set ironing temperature.
5 Putthemainspluginanearthedwallsocket.
, Theambertemperaturelightgoeson.
6 Whentheambertemperaturelighthasgone
out,waitawhilebeforeyoustartironing.
, Thetemperaturelightgoesonfromtimeto
timeduringironing.
Using the appliance
Note: The iron may give off some smoke when you use
it for the rst time. This ceases after a short while.
Ironing without steam
1
Set the steam control to position 0 (= no steam).
ENGLISH12
4239_000_8233_2_DFU-Luxury_A6_v3.indd 12 3/20/14 9:26 AM