User manual

Problem Possiblecause Solution
The iron is not
hot enough.
Set an ironing temperature
at which the steam boost
function can be used
( 3 to MAX). Put the
iron on its heel and wait
until the temperature
light has gone out before
you use the steam boost
function.
Water
droplets
drip onto
the fabric
during
ironing.
You have not
closed the
cap of the
lling opening
properly.
Press the cap until you
hear a click.
You have put an
additive in the
water tank.
Rinse the water tank and
do not put any additive in
the water tank.
The set
temperature
is too low for
steam ironing.
Set a temperature of or
2 higher.
24
ENGLISH