User manual

Problem Possiblecause Solution
The iron
does not
produce
any steam.
There is not
enough water in
the water tank.
Fill the water tank (see
chapter ‘Preparing for use’,
section ‘Filling the water
tank’).
The steam
control is set to
position 0.
Set the steam control to
a position between 1 and
6 (see chapter ‘Using the
appliance’, section ‘Steam
ironing’).
The iron is not
hot enough and/
or the drip-stop
function has
been activated.
Set an ironing temperature
that is suitable for steam
ironing (
3 to MAX).
Put the iron on its heel and
wait until the temperature
light has gone out before
you start ironing.
The iron
does not
produce
a steam
boost.
You have used
the steam boost
function too
often within
a very short
period.
Continue ironing in
horizontal position and wait
a while before you use the
steam boost function again.
23
ENGLISH