User manual

Problem Possiblecause Solution
Water drips
from the
soleplate
after the
iron has
cooled
down or has
been stored.
You have put the
iron in horizontal
position with water
still left in the water
tank.
Empty the water tank.
Flakes and
impurities
come out of
the soleplate
during
ironing.
Hard water forms
akes inside the
soleplate.
Use the Calc-Clean function
one or more times (see chapter
‘Cleaning and maintenance’,
section ‘Using the Calc-Clean
function’).
The red
light ashes
(specic
types only).
The automatic
shut-off function
has switched off the
iron (see chapter
‘Features’, section
‘Automatic shut-off
function’).
Move the iron slightly to
deactivate the automatic shut-off
function. The red auto-off light
goes out.
The iron
makes a
humming
sound.
The Ionic
DeepSteam
function is on.
If you hear the humming
sound when you iron without
steam, press the Ionic DeepSteam
button to switch off the Ionic
DeepSteam function. The Ionic
DeepSteam function has no effect
when you iron without steam.
ENGLISH 21