User manual

Double-Active Calc System
- The Anti-Calc tablet prevents scale from clogging
the steam vents. This tablet is constantly active and
does not need to be replaced.
- The Calc-Clean function removes the scale
particles from the iron.
Using the Calc-Clean function
Use the Calc-Clean function once every two weeks.
If the water in your area is very hard (i.e. when akes
come out of the soleplate during ironing), use the
Calc-Clean function more frequently.
1 Makesuretheapplianceisunplugged.
2 Set the steam control to position 0.
3 Fill the water tank to the MAX level.
Donotputvinegarorotherdescalingagentsin
the water tank.
4 SetthetemperaturedialtoMAX.
5 Putthepluginanearthedwallsocket.
6 Unplugtheironwhenthetemperature
lightgoesout.
7 Hold the iron over the sink, press and hold the
Calc-Cleanbuttonandgentlyshaketheironto
and fro.
, Steamandboilingwatercomeoutofthe
soleplate.Impuritiesandakes(ifany)are
ushedout.
8 ReleasetheCalc-Cleanbuttonassoonasall
thewaterinthetankhasbeenusedup.
9 RepeattheCalc-Cleanprocessiftheironstill
containsalotofimpurities.
ENGLISH16