User manual

Steam boost function
A steam boost from the special Steam Tip soleplate
helps remove stubborn creases. The steam boost
enhances the distribution of steam into every part of
your garment.
The steam boost function can only be used at
temperature settings between 3 and MAX.
1 Pressandreleasethesteamboostbutton.
Vertical steam boost
1 Youcanalsousethesteamboost
functionwhenyouholdtheironinvertical
position.
This is useful for removing creases from hanging
clothes, curtains etc.
Never direct the steam at people.
Drip stop
This iron is equipped with a drip-stop function: the
iron automatically stops producing steam when
the temperature is too low, to prevent water from
dripping out of the soleplate. When this happens,
you may hear a sound.
Automatic shut-off function (specic types
only)
The automatic shut-off function automatically
switches off the iron if it has not been moved for a
while.
, Theredauto-offlightashestoindicatethat
theironhasbeenswitchedoffbytheautomatic
shut-offfunction.
To let the iron heat up again:
ENGLISH14