Owner's Manual
2 Press the spray button several times to moisten the article to be
ironed.
Shot of steam
A powerful shot of steam helps remove stubborn creases.
1 Makesurethatthereiswaterinthewatertank.
2 Press and hold the shot-of-steam button for a few seconds. Then
release the button.
Note: The shot-of-steam function can only be used at temperature settings
between 3 and MAX.
Vertical shot of steam
- You can also use the shot-of-steam function when you hold the iron
in vertical position. This is useful for removing creases from hanging
clothes, curtains etc.
Never direct the steam at people.
The turbo-steam function helps remove difcult creases.
1 Makesurethatthereiswaterinthewatertank.
2 Press and hold the turbo-steam button for a few seconds. Then
release the button.
Note: The turbo-steam function can only be used at the MAX temperature
setting.
Note: Do not keep the button pressed for more than 10 seconds. Wait at
least one minute before you use the turbo-steam function again to let the iron
reheat. The iron is hot enough when the temperature light goes out.
Drip stop
This iron is equipped with a drip-stop function to prevent water from
dripping out of the soleplate: the iron automatically stops producing steam
when the temperature is too low. When this happens, you may hear a
sound.
ENGLISH 13