User Manual
13
ENGLISH
Warning: Hot steam comes out of the iron. Do not remove
wrinkles from a garment while someone is wearing it. To
prevent burns, do not direct the steam at people.
Note: The steam boost function should only be used at
temperature setting between ●●● to MAX. Leaking may
appear if you use steam boost at too low a temperature.
Ironing tips
Minimizing wrinkles while drying
Start wrinkle removal early in the drying process by spreading
out the laundry properly after washing. Put the garments on
hangers to let them dry naturally with less wrinkles.
Shirt ironing
Start with the time-consuming parts such as collar, cu links
and sleeves.
Next, iron the bigger parts like front and back. By doing this,
you prevent wrinkling the bigger parts when you are busy
ironing the time-consuming ones.
Collar: When you iron a collar, start on its underside and iron
from the outside (the pointy end) inwards. Turn over and repeat.
Fold down the collar and press the edge for a crisp nish.
Buttons: Iron on the reverse side of the buttons for more
eective faster ironing.
Auto shut o
The auto shut o function automatically switches o the iron
if has not been used for 30 seconds resting on its soleplate or
8 minutes resting on its backplate. The auto-o light will start
ashing.
- To let the iron heat up again, pick up the iron or move it
slightly. The auto-o light goes out.