User Manual

, Theambertemperaturelightgoeson.
5 Whentheambertemperaturelighthasgoneout,waitawhilebeforeyoustartironing.
The temperature light goes on from time to time during ironing.
Using the appliance
Note: The iron may give off some smoke when you use it for the rst time. This stops after a short while.
Steam ironing
1 Makesurethatthereisenoughwaterinthewatertank.
2 Settherequiredironingtemperature(seechapter‘Preparingforuse’,section‘Settingthe
temperature).
3 Settheappropriatesteamsetting.Makesurethatthesteamsettingyouselectissuitablefor
thesetironingtemperature:(Fig.7)
- 1 - 3 for moderate steam (temperature settings 2 to 3)
- 4 - 6 for strong steam (temperature settings 3 to MAX)
Note: The iron starts to produce steam as soon as it reaches the set temperature.
Note: If the set ironing temperature is too low (MIN to 2), water may drip from the soleplate (see
chapter ‘Features, section ‘Drip stop’).
Ironing with Ionic DeepSteam (specic types only)
When you use the Ionic DeepSteam function during steam ironing, the steam produced is ner than
during regular steam ironing. Fine steam reaches deeper, especially into thick fabrics. This helps you
to remove stubborn creases easily.
1 Followsteps1to3insection‘Steamironing’.
2 PressandholdtheIonicDeepSteambutton(Fig.8).
, TheIonicDeepSteamlightgoesonandyouhearahummingsound.(Fig.9)
3 TheironnowproducesIonicDeepSteamtohelpyouremoveeventhetoughestcreases.
Note: The Ionic DeepSteam function is only effective when it is used in combination with a steam setting
and a temperature setting between 2 and MAX.
Note: Do not use the Ionic DeepSteam function when you iron without steam and/or at low temperature
settings. However, ironing at low temperatures without steam with the Ionic DeepSteam function
switched on will not damage the iron.
Note: The Ionic DeepSteam output may vary from time to time, depending on the ironing temperature.
Ironing without steam
1 Setthesteamcontroltoposition0(=nosteam)(Fig.2).
DonotusetheIonicDeepSteamfunction,asthisfunctionhasnoeffectwhenyouironwithout
steam.
2 Settherequiredironingtemperature(seechapter‘Preparingforuse’,section‘Settingthe
temperature’).
After ironing
1 Removethemainsplugfromthewallsocket.
2 Ifyouhavebeensteamironing,emptythewatertank.
3 Let the iron cool down in a safe place.
ENGLISH8
4239.000.6219.5.indd 8 21-10-09 14:05