User manual

22
Problem Possible cause Solution
Steam leaves stains
on the garment or
impurities come out
of the steamer head
Scales/calc are formed
inside the steamer.
Perform De-Calc function (refer
to section).
Apart from tap water, you
have lled other liquids /
additives or descaling
agents into the water tank.
Use only tap, demineralized or
ltered water when lling up the
water tank.
The De-Calc hole is
blocked by scales.
The water you use is very
hard and/or you have
not performed De-Calc
function frequently. A
large amount of scales are
formed inside the steamer.
Use a tool to loosen the scales.
Perform De-Calc function once
a month or more frequently.
Problema Possibile causa Soluzione
Il sistema di stiratura a
vapore non si riscalda.
Il sistema di stiratura a vapore
non è collegato correttamente o
non è acceso.
Controllare se la spina
di alimentazione è stata
correttamente inserita e se la
presa a muro funziona.
Controllare se il sistema di
stiratura a vapore sia acceso.
Il sistema di stiratura a
vapore non produce
vapore.
Il sistema di stiratura a vapore
non è collegato correttamente o
non è acceso.
Controllare se la spina
di alimentazione è stata
correttamente inserita e se la
presa a muro funziona.
Controllare se il sistema di
stiratura a vapore sia acceso.
Il sistema di stiratura a
vapore non si è riscaldato
sucientemente.
Far riscaldare il sistema di
stiratura a vapore per 60 secondi
(la spia "Steam ready" (Vapore
pronto) lampeggia). Quando il
sistema di stiratura a vapore è
pronto per essere utilizzato, la
spia si illumina con luce ssa.
Non avete premuto
completamente il pulsante del
vapore.
Premere il pulsante del vapore
no in fondo per alcuni secondi.
IT