Always here to help you Register your product and get support at www.philips.
1
GC4400 series English 6
English Introduction Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. General description (Fig.
English 7 -- Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. -- This appliance is intended for household use only. Electromagnetic fields (EMF) This Philips appliance complies with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this user manual, the appliance is safe to use based on scientific evidence available today.
English Using the appliance Note:The iron may give off some smoke when you use it for the first time.This stops after a short while. Steam ironing 1 Make sure that there is enough water in the water tank. 2 Set the required ironing temperature (see chapter ‘Preparing for use’, section ‘Setting the temperature). 3 Set the appropriate steam setting. Make sure that the steam setting you select is suitable for the set ironing temperature: (Fig.
English 9 Features Spray function You can use the spray function at any temperature to moisten the article to be ironed. This helps remove stubborn creases. 1 Make sure that there is enough water in the water tank. 2 Press the spray button several times to moisten the article to be ironed (Fig. 10). Steam boost function A steam boost from the special Steam Tip soleplate helps remove stubborn creases. The steam boost enhances the distribution of steam into every part of your garment.
English Cleaning and maintenance Cleaning 1 Wipe flakes and any other deposits off the soleplate with a damp cloth and a non-abrasive (liquid) cleaning agent. To keep the soleplate smooth, avoid hard contact with metal objects. Never use a scouring pad, vinegar or other chemicals to clean the soleplate. 2 Clean the upper part of the iron with a damp cloth. 3 Regularly rinse the water tank with water. Empty the water tank after you have rinsed it.
English 11 Storage 1 Set the steam control to position 0 and unplug the iron. 2 Empty the water tank (Fig. 16). 3 Let the iron cool down in a safe place. 4 Wind the mains cord and fix it with the cord binder. (Fig. 17) 5 Store the iron on its heel on a stable surface. Heat-resistant protective cover (specific types only) You can store the iron on the heat-resistant protective cover immediately after ironing. It is not necessary to let the iron cool down first.
English Problem Possible cause Solution The iron is not hot enough and/or the drip-stop function has been activated. Set an ironing temperature that is suitable for steam ironing ( 2 to MAX). Put the iron on its heel and wait until the temperature light has gone out before you start ironing. You have used the steam boost function too often within a very short period. Continue ironing in horizontal position and wait a while before you use the steam boost function again.
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
4239.000.8449.
