User Manual

Problem Possible cause Solution
EN
The steamer does
not heat up.
The steamer is not
plugged in properly or
not switched on.
Check if the mains plug is
inserted properly and its wall
socket is working.
Check if the steamer is
switched on.
The steamer does
not produce any
steam.
The steamer is not
plugged in properly or
not switched on.
Check if the mains plug is
inserted properly and its wall
socket is working.
Check if the steamer is
switched on.
The steamer has not
heated up suciently.
Let the steamer heat up for
45 seconds (steam-ready lights
up). The steamer is ready to be
used when the light goes o.
You have not pressed the
steam trigger fully.
Press the steam trigger fully for
a few seconds.
The water level in the
water tank is too low.
Unplug the steamer and rell
the water tank.
Water droplets drip
from the steamer
head.
The steamer has not
heated up suciently.
Let the steamer heat up for
45 seconds (steam-ready lights
up). The steamer is ready to be
used when the light goes o.
The steamer
produces a pumping
sound/the handle
vibrates.
Water is pumped to
the steamer head to be
converted into steam.
This is normal.
Water inside the tank has
all been used up.
Rell the water tank.
Water leaks around
the steam trigger
and gripping area.
Water tank lling door is
not closed properly
Ensure that lling door is closed
properly.
Steam leaves stains
on the garment or
impurities come out
of the steamer head
Apart from tap water, you
have lled other liquids /
additives or descaling
agents into the water tank.
Use only tap, demineralized or
ltered water when lling up
the water tank.
17