Manual

E Temperature indicator
F Filling cap
G Water filling opening
H Water tank
I Type plate
J Cord
K Extra Steam function (press steam control dial) (type GC2105)
L Temperature pilot light/Auto-off pilot light (type GC2225, GC2130
only).
M Shot of steam button 9 (types GC2225, GC2220, GC2215,
GC2130, GC2125, GC2120, GC2115, GC2110 only).
Before first use
1 Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
C
2 Remove any sticker or protective foil from the soleplate.
3 Heat up the iron to maximum temperature and pass the iron
over a piece of damp cloth for several minutes to remove any
residues from the soleplate.
The iron may give off some smoke when you use it for the first time
This will cease after a short while.
Preparing for use
Filling the water tank
1 Remove the mains plug from the wall socket.
C
2 Set the steam control to position O (= no steam).
3 Open the filling cap.
(types GC2225, GC2220, GC2215, GC2130, GC2125 and GC2120
only)
4 Tilt the iron.
C
5 Use a measuring cup to fill the water tank up to maximum level.
6 Close the filling cap (click!).
(types GC2225, GC2220, GC2215, GC2130, GC2125 and GC2120
only)
If the tap water in your area is very hard, we advise you to use distilled
water. Do not use vinegar, starch or chemically descaled water.
Do not fill the water tank beyond the MAX indication.
ENGLISH 7