operation manual

3 If the amber pilot light comes on after the iron has been
moved,wait for it to go out before you start ironing.
4 If the amber light does not come on after the iron has been
moved,the iron is ready for use.
Cleaning and maintenance
Calc-Clean
The Calc-Clean function removes scale and impurities.
Use the Calc-Clean function once every two weeks.If the water in
your area is very hard (i.e.when flakes come out of the soleplate
during ironing), the Calc-Clean function should be used more
frequently.
1 Set the steam control to position O.
2 Fill the water tank to the maximum level.
Do not pour vinegar or other descaling agents into the water tank.
3 Set the temperature dial to MAX.
4 Put the plug in the wall socket.
5 Unplug the iron when the amber pilot light has gone out.
C
6 Hold the iron over the sink and set the steam control to
position 1(Calc-Clean).The steam control knob will spring up
slightly.
C
7 Pull the steam control up slightly and gently shake the iron.
B
Steam and boiling water will come out of the soleplate.Impurities and
scale (if any) will be flushed out.
C
8 Pull the steam control knob further up to remove the steam
control needle.Use vinegar to remove scale,if any,from the
needle.
Do not bend or damage the steam control needle.
ENGLISH8