Register your product and get support at www.philips.
1 Important 4 2 Your Mini Hi-Fi System 6 Safety Notice Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started Connect FM antenna Connect AM antenna Connect speakers Connect power Prepare the remote control Auto install radio stations Set clock Turn on 4 5 6 6 7 9 11 11 11 11 12 12 13 13 13 4 Play 14 5 Play options 15 6 Adjust volume level and sound effect 16 Play disc Play from USB Play from an external device Repeat and random play Program t
1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
•• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never place this apparatus on other electrical packaging materials, exhausted batteries and old equipment. English Warning equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat. •• Never look into the laser beam inside this apparatus. •• Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power.
2 Your Mini Hi-Fi System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.Philips.com/welcome. Introduction With this unit, you can enjoy audio from discs, USB devices, external devices, or radio stations. For your convenience, you can load up to 3 discs at once.
English Overview of the main unit a b z y c d x e f g h i w v j k l m u o r n t o p q s r a DISC 1/2/3 • Select a disc. e Source selection keys • Select a source. b DISC CHANGE • Change a disc. f CLOCK • Set the clock. c Display panel • Show current status. g SLEEP/TIMER • Set the sleep timer. • Set the alarm timer. • Turn on or off sleep/alarm timer. d • Turn on the unit or switch to standby mode. h VOLUME • Adjust volume.
i j • • • • / • Skip to the previous/next track. Search within a track/ disc/USB. Tune to a radio station. Adjust time. Stop play or erase a program. k ALBUM/PRESET+/• Skip to the previous/next album. • Select a preset radio station. • Adjust time. • Select 12 hour or 24 hour format. l MUTE • Mute volume. m VAS/IS • Select an ambience-based equaliser setting. • Turn on or off incredible surround. n • Jack for a USB mass storage device. o DSC • Select a preset sound equalizer setting.
d MODE • Select repeat play or random play. English Overview of the remote control e MAX • Turn on or off instant power boost for sound. f g / • • • • / Search within a track/ disc/USB. Tune to a radio station. Skip to the previous/next track. Adjust time. h DSC • Select a preset sound equalizer setting. i • Stop play or erase a program. j ALB/PRESET+/• Skip to the previous/next album. • Tune to a radio station. • Adjust time. k MUTE • Mute volume.
r VAC • Select an ambience-based equaliser setting. s SLEEP • Set the sleep timer. t TIMER • Set the alarm timer.
Connect AM antenna 1 English 3 Get started Assemble the AM loop antenna. Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No.
To connect speakers to the main unit: 1 Insert the connector of the right speaker wire to “R”, and the connector of the left speaker wire to “L”. Note •• The type plate is located on the back of the main unit. 1 2 Connect the AC power cable to: • the main unit. • the wall socket. Prepare the remote control Insert the connector of the subwoofer wire to “SUB” socket. SUB SUB Note •• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire.
When you connect power and no radio stations are stored, the unit automatically begins to store radio stations. 1 2 Connect the unit to the power supply. »» [AUTO INSTALL - PRESS PLAY] (auto install - press the PLAY button) is displayed. Press on the main unit to start installation. »» [AUTO] (auto) is displayed. »» The unit automatically stores radio stations with sufficient signal strength. Turn on 1 Press POWER. »» The unit switches to the last selected source.
4 Play Play from USB Play disc 1 2 Press CD 1/2/3 to select the disc source. Press OPEN/CLOSE on the main unit to open the disc compartment. 3 Load up to two discs on the disc trays, with the printed side facing up. • To load the third disc, press DISC CHANGE on the main unit to rotate to the disc tray. Note •• Ensure that the USB device contains playable audio contents for supported formats.
Repeat and random play 1 2 Display play information 1 English 5 Play options During play, press DISPLAY/CLOCK repeatedly to select different play information. Press MODE repeatedly to select: • : the current track is played repeatedly. • : all tracks are played repeatedly. • : all tracks are played randomly and repeatedly. • : all tracks are played randomly. To return to normal play, press MODE repeatedly until play mode is no longer displayed.
6 Adjust volume level and sound effect Note •• MAX sound and DSC (Digital Sound Control) cannot be activated at the same time. • • Enhance bass The best DBB (Dynamic Bass Enhancement) setting is generated automatically for each DSC selection. You can manually select the DBB setting that best suits your listening environment. 1 Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. Mute sound 1 During play, press MUTE to mute/unmute sound.
Program radio stations manually Tune to a radio station You can program a maximum of 40 preset radio stations. 1 2 3 Press TUN repeatedly to select FM or AM. Press and hold / for more than 2 seconds. »» [SEARCH] (search) is displayed. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception.
8 Other features Set the alarm timer Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 This unit can be used as an alarm clock. The disc, radio or USB is activated to play at a preset time. 1 2 3 4 5 6 7 8 Ensure that you have set the clock correctly. (see ‘Set clock’ on page 13) Press POWER to switch to standby mode. Press and hold TIMER for more than 2 seconds. »» A prompt to select the source is displayed.
English Karaoke You can connect a microphone and sing along with a music source. 1 2 3 4 Turn MIC VOL to the minimum level. Connect a microphone to the microphone port on the unit. Press CD 1/2/3, or TUNER, or USB, or MP3 LINK/AUX to select the source, and start play. Sing through the microphone. • To adjust the volume of the source, press VOL +/-. • To adjust the volume of the microphone, turn MIC VOL.
9 Product information •• Product information is subject to change without prior notice. Specifications 400W RMS 60 - 16kHz >67dB A (IEC) 2000mV/2500mV Disc Audio DAC Total harmonic distortion Frequency response S/N ratio Number of presets FM AM FM: 87.
• Compatible USB devices: • USB flash memory (USB 2.0 or USB 1.1) • USB flash players (USB 2.0 or USB 1.1) • memory cards (requires an additional card reader to work with this unit) Supported formats: • USB or memory file format FAT12, FAT16, FAT32 (sector size: 512 bytes) • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate • WMA v9 or earlier • Directory nesting up to a maximum of 8 levels • Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • ID3 tag v2.
10 Troubleshooting Warning •• Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. FWM653_77_UM_V1.
