Specifications

19
English
Clock/Timer
Setting the sleep timer
The sleep timer enables the system to switch off
by itself after a set period of time.
1 In active mode, press TIMER/SLEEP on the
remote control repeatedly until the desired
timer option appears.
➜ Selections are as follows (time in minutes):
SLPOFF=SLP120=SLP90=SLP60
=SLP45=SLP30=SLP15=SLPOFF
➜ Display shows if activated, and disappears if
deactivated.
2 To cancel the sleep function, either press
TIMER/SLEEP on the remote control once or
more until “SLPOFF” appears, or press
STANDBY-ON y to switch to standby mode.
To check the remaining length of time
after sleep timer is activated
● Press TIMER/SLEEP once.
Setting the clock
1 In standby mode, press and hold CLOCK.
➜ The clock digits for the hours flash.
2 Adjust the VOLUME control knob or press
VOLUME 3/4 on the remote control to set
the hours.
3 Press CLOCK.
➜ The clock digits for the minutes flash.
4 Adjust the VOLUME control knob or press
VOLUME 3/4 on the remote control to set
the minutes.
5 Press CLOCK to confirm the time.
Note:
– If the clock has not been set, 0:00 will be
displayed.
pg 001-023_FWM185-98_Eng 2007.7.4, 16:5119