Specifications

English
9
Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
● Press STANDBY-ON y.
➜ The system will switch to the last selected
source.
To switch the system to standby mode
● Press STANDBY-ON y.
➜ The volume level (up to a maximum volume
level of 15), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 30 minutes after CD playback has
ended and no control is operated.
Adjusting volume and sound
1 Adjust the VOLUME control knob or press
VOLUME 3/4 on the remote control to
increase or decrease volume.
➜ Display shows the volume level UOL and a
number from 0-40.
2 Press DBB to switch bass enhancement on or
off.
➜ Display shows: DBB if
the DBB is activated.
3 Press DSC on the remote
control repeatedly to select
the desired sound effect:
OPTIMAL, JAZZ, ROCK or
TECHNO.
➜ The selected DSC is
shown.
4 Press MUTE on the remote control to stop
sound playback instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To start sound playback you can:
– press MUTE again;
– adjust the volume controls.
pg 001-022_FWM185-05_Eng 2007.3.12, 9:319