User Guide

English
17
Clock/Timer
Setting the timer
● The system can be used as an alarm clock. CD
or TUNER can be set to switch on at a preset
time. The clock time needs to be set first before
the timer can be used.
● If no button is pressed within 7 seconds during
timer setup, the system will exit timer setting
mode automatically.
1 In active mode, press and hold CLOCK/
TIMER for more than 2 seconds.
2 Press TITILE-/+ ¡1 / 2™ (í/ë on the
remote) to set the hours.
3 Press CLOCK/TIMER again.
➜ The clock digits for the minutes flash.
4 Press TITILE-/+ ¡1 / 2™ (í/ë on the
remote)to set the minutes.
5 Press CLOCK/TIMER to confirm the time
➜ The timer is now set and actiated.
Activating and deactivating
TIMER
● In standby or during playback, press
TIMER ON/OFF once.
➜ Display shows if activated, and disappears if
deactivated.
Setting the clock
1 In any mode, press CLOCK/TIMER twice.
➜ The clock digits for the hours flash.
2 Press TITILE-/+ ¡1 / 2™ (í/ë on the
remote) to set the hours.
3 Press CLOCK/TIMER again.
➜ The clock digits for the minutes flash.
4 Press TITILE-/+ ¡1 / 2™ (í/ë on the
remote)to set the minutes.
5 Press CLOCK/TIMER to confirm the time.
Note:
– If the clock has not been set, 0:00 will be
displayed.
FWM139
pg001-pg020_FWM139_55_Eng 2006.5.23, 16:0617