User Guide

16
English
Functional Overview
Notes:
– First, select the source you wish to control by
pressing one of the source select keys on the
remote control (DISC or TUNER, for example).
– Then select the desired function (
¡ , O or
P for example).
1 STANDBY-ON 2
– In power on mode,
Press briefly to go to Eco-power mode;
Press and hold to go to Standby mode .
2 SOURCE
– to select the relevant active mode: DISC, USB ,
TUNER or TAPE/AUX.
– TUNER : toggles between FM and MW band.
3 MODE
– to select REPEAT or SHUFFLE function.
Remote control
4 A-B
– to repeat a specific section in the same track/
chapter
5 SYSTEM MENU
– to enter or exit the system setup page.
6 1 / ¡ / 5 / 4
– to select movement direction in disc contents
menu/system menu bar.
– in tuner mode, to tune to lower or higher radio
frequency. (1 / ¡)
– in Disc mode, press to fast reverse/forward the
disc.(1 / ¡)
7 AUDIO
– to select the audio channel.
8 O/ P
– in Disc /USB mode, press to skip to the
previous/next chapter/track.
– in Tuner mode, to select a preset radio station
number
9 PLAY/PAUSE 2;
–to start or interrupt disc /USB/ tape playback.
– to resume playback from last stop point.
0 SOUND
- to select various sound effects.
! DBB (Dynamic Bass Boost)
– to select the desired DBB level (DBB 1, DBB 2,
DBB3 or DBB OFF).
@ Numeric Keypad (0-9)
– to enter a track/title/chapter number of the disc.
– to enter a number of preset radio stations.
# GOTO
– to go directly to desired title, chapter, track or
time.
$ 0
– to open or close the disc tray.
% TITLE /RETURN
– go back to title menu (for DVD only).
– go back to PBC menu page (for VCD/SVCD
PBC ON).
^ DIM
– to select different brightness for VFD.
& DISC MENU (disc /USB mode only)
– back to root menu (for DVD only)
– to switch on or off the playback control mode
(for VCD/SVCD)
– toggle through File list, Folder, Playlist (for MP3/
WMA /DivX)
* OK
– to exit or confirm the selection.
( SUBTITLE
pg047-pg055_FWD876-Eng-98 2007.12.28, 9:4216