Specifications

English
37
Ta pe Operation/Recording
Rewinding or forwarding fast when
playback is stopped
1 Press 1 or ¡ on the front panel.
2 Press 7 when you reach the desired passage.
General information on
recording
If you don’t intend to record via the
microphone, unplug it to avoid unwanted
recording source.
● For recording, only use tape of IEC type I(normal
tape).
● The recording level is set automatically,
regardless of the position of the Volume, Vocal,
Key control and so forth.
● The type is secured at both ends with leader
tape. At the beginning and end of the tape,
nothing will be recorded for seven seconds.
● To prevent accidental recording, break out the
tab on the left shoulder of the tape side you
want to protect.
● Press ● in Disc, Tuner or AUX mode, the record
key ● can’t be press if there is no recordable
tape in tape deck.
IMPORTANT!
– Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
– Store tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV set
or speaker).
Ta pe playback
● Control tape playback must useing cassette key.
1 Press 0 to open the tape deck door.
2 Insert a recorded tape and close the tape door.
● Load the tape with the open side down and the
full spool to the left.
3 Press TAPE on the remote control to select
tape mode.
4 Press 3 to start playback.
Interruptting playback
● Press 8 to interrupt playback.
Stopping playback
● Press 70 to stop playback.
pg 022-044_FWD186_98-Eng-B 2006.5.26, 10:1137