User Guide

23
English
Tuner Operations
Tuning to radio stations
1 Push the source switch to TUNER.
2 Tu rn the TUNING knob on the system until
the frequency indication starts to change.
➜ The current radio frequency will appear on
the display.
3 To tune to a weak station, turn the TUNING
knob to search until a radio station with sufficient
signal strength is found.
Notes:
– The FM antenna is fixed in the system.
Ta pe Operation/Recording
IMPORTANT!
– Before playing a tape, check and
tighten slack tape with a pencil. Slack
tape may get jammed or may burst in
the mechanism.
– Store tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV set
or speaker).
Ta pe playback
● Only cassette keys can be used for tape playback
control.
1 Press 70 to open the tape deck door.
2 Insert a recorded tape and close the tape door.
● Load the tape with the open side down and the
full spool to the left.
3 Push the source switch to select tape mode.
4 Press 3 to start playback.
Interruptting playback
● Press 8 to interrupt playback.
Stopping playback
● Press 70 to stop playback.
Rewinding or forwarding fast when
playback is stopped
1 Press 5 or 6 on the front panel.
2 Press 70 when you reach the desired passage.
pg 001-028_FWD132-98_Eng 2007.5.15, 16:3823