DVD Mini-HiFi System FWD132 Register your product and get support at www.philips.
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 Remove fuse cover and fuse. 3 Refit the fuse cover. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
Repeat play / Shuffle play mode ............................. 14 To cancel Shuffle mode: ........................................... 14 Repeating a section within a chapter/track ........ 15 General Information/ Maintenance Features .................................................................. 4 Discs for playback ................................................ 4 Region codes ............................................................... 4 Supplied accessories ......................................
General Information/Maintenance English Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. – Following formats can’t be supported. • The files like *.VMA, *.AAC, *.DLF, *.M3U, *.PLS, *.
Care and safety information ● ● ● ● Avoid high temperatures, moisture, water and dust Do not expose the system, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep disc trays closed to avoid dust buildup on the lens. No objects filled with liquids, such as vases, shall be placed on the apparatus. No naked flame sources, such as lighted candles, should be placed on the apparatus.
Connections English Step 1: Placing speakers Step 2: Connecting speakers Connect the speaker wires to the SPEAKERS (FRONT) terminals, right speaker to “R” and left speaker to “L”, coloured (marked) wire to “+” and black (unmarked) wire to “–”. Fully inser t the stripped portion of the speaker wire into the terminal as shown. Place the front left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position.
Step 3: Connecting TV set IN English Connections Step 4: Connecting the power cord OUT IMPORTANT! – Connect the system directly to the TV set. After everything is connected properly, plug in the AC power cord to the power outlet. Using Video In jack (CVBS) ● Use the composite video cable (yellow) to connect the system’s VIDEO jack to the video input jack (or labeled as A/V In, Video In, Composite or Baseband) on the TV set. Never make or change any connection with the power switched on.
Functional Overview English 1 12 2 13 WMA 3 4 14 5 15 6 7 8 9 10 18 19 22 Controls on the system 1 STANDBY ON – to switch the system on or to standby mode. 2 DISC TRAY 3 iR – point the remote control towards this sensor. 4 VOLUME (4/3) – to increase or decrease the volume. 5 DBB – to enhance the bass response. 6%PREV/NEXT( S / T ) – to select previous/next title,chapter or track. during playback. – to skip to beginning of current title, chapter or track. (S) – to fast reverse/forward the disc.
Remote control 1 2 3 15 4 5 16 6 7 8 17 9 18 10 19 11 20 12 21 13 22 14 23 Notes: – First, select the source you wish to control by pushing the source switch to one of the source on the panel (DISC or TUNER, for example). – Then select the desired function (I1 or ¡I for example). 1 – 2 – 3 – 4 – 5 – – 2 to switch the system on or to standby mode. Numeric Keypad (0-9) to enter a track/title number of the disc. DISC MENU (disc mode only) to enter or exit the disc contents menu.
Preparations English IMPORTANT! – Make sure to complete the preparation procedures before operating the system. Step 1: Inserting batteries into the remote control 3 Step 2: Setting the TV set IMPORTANT! – Make sure you have completed all the necessary connections. 1 Push the source switch on the front panel to DISC. 2 Turn on the TV set and set to the correct VideoIn channel. You should see the blue Philips DVD background screen on the TV set.
PAL – Select this if the connected TV set is PAL system. It will change the video signal of an NTSC disc and output to PAL format. Step 3: Setting language preference You can select your preferred language settings so that this DVD Mini Hi-Fi System will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the language set by default will be used instead.
Basic Functions English Switching on/off Selecting DBB effect Switching the system ON To enhance the bass response, press DBB once or more to select your option: DBB ON, DBB OFF. In Standby ● Press STANDBY ON ➜ The system will go back to its previous status. Switching the system to STANDBY mode In any other source mode ● Press STANDBY ON (or 2 on the remote control).
IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism. – Do not move the system during playback. Doing so may damage the system. – Do not push on the disc tray or put any object other than disc on the disc tray. Doing so may cause the system to malfunction. – DVD discs and players are designed with regional restrictions.
Disc Operations English Skipping to another title (track)/ chapter For DVD/VCD ● During playback, press I1 to playback the beginning of the current title (track)/chapter, press I1 twice in 2 seconds to skip to previous title (track)/chapter, and press ¡I to skip to next title (track)/chapter. For MP3/WMA/JPEG ● Press I1 or ¡I on the front panel or on the remote control repeatedly during playback to skip to previous or next track.
Repeating a section within a chapter/ track You can play a specific section in a chapter/track repeatedly. 1 Press REPEAT A-B at your chosen start point. 2 Press REPEAT A-B again at your chosen end point. ➜ The passage will now repeat continuously. 3 To resume normal play, press REPEAT A-B again. 3 4 5 Select {Start} to play the program. To stop playback, press 7 once. To exit the program mode, press 7 again.
Disc Operations English For JPEG: PLAY... ● Press ZOOM to change the picture zooming scale: ZOOM X100% pZOOM X125% pZOOM X150% pZOOM X200% pZOOM X75% pZOOM X50%p (ZOOM OFF)... ● To pan through the enlarged image,press 1 / 2 / 5 / 4 buttons to move the zoomed picture left, right, up or down. For VCD 2 3 ● Press ZOOM repeatedly to exit ZOOM mode. This operation only works on DVDs with multiple audio languages. For VCD: ● Press AUDIO to select the desired audio channels for sound.
For MP3 or WMA Moving to another title/chapter Some discs may contain more than one title or chapter. If the disc has a title or chapter menu recorded on it, you can star t playback from the selected item. 1 Press DISPLAY/OSD on the remote control to display the message of title and chapter. 2 Use 5 / 4 to highlight a title/chapter item and press OK. 3 Use numeric keys (0-9) to select a desired title/chapter number. 4 Press DISPLAY/OSD to exit the disc information menu.
MP3/ Picture Disc Operations English ➜ 12 thumbnail pictures will appear on the TV screen. Playing MP3/Picture disc (Kodak, JPEG) IMPORTANT! – You have to turn on your TV set and set to the correct Video In channel. MP3/JPEG Picture disc 1 Load an MP3/Picture (JPEG) disc. ➜ The disc reading time may exceed 30 seconds due to complexity of the directory/file configuration. ➜ The disc menu appears on the TV. 2 Select a track in the menu and press OK to start playback.
Using the setup menu (user preference settings) This DVD setup is carried out via your TV set, enabling you to customize the DVD Mini Hi-Fi System to suit your particular requirements. 1 In disc mode, press SYSTEM MENU. ➜ The setup menu will appear on the TV screen. ➜ Playback will pause. English DVD Menu Operations Setting the TV Display Make sure the format you need is available on the disc. If not, your setting will be invalid.
DVD MeLnu Operations English 3 Setting the screen saver If set to ON, the screen saver will be activated when you leave the system in stop or pause mode for 5 minutes. The default setting is ON. PHILIPS General Setup Page Use the numeric keys (0-9) to enter your sixdigit code. ➜ The password supplied by default is 000000. ➜ If you forget your existing password, key in “136900”. ● Go to “Password” and enter your new code. Then, enter the same code again to confirm.
Restricting playback by setting parental level Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country specific. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. 1 2 In disc stop mode, press SYSTEM MENU. Use 1 / 2/ 3 / 4 on the remote control to navigate in the menu.
Tuner Operations English Tuning to radio stations 1 2 3 Push the source switch to TUNER. Turn the TUNING knob on the system until the frequency indication starts to change. ➜ The current radio frequency will appear on the display. To tune to a weak station, turn the TUNING knob to search until a radio station with sufficient signal strength is found. Notes: – The FM antenna is fixed in the system. Tape Operation/Recording IMPORTANT! – Before playing a tape, check and tighten slack tape with a pencil.
IMPORTANT! – Recording is permissible if copyright or other rights of third parties are not infringed upon. – Recording is possible only in tape deck. General information on recording ● For recording, only use tape of IEC type I(normal tape). ● The recording level is set automatically, regardless of the position of the Volume, Vocal, Key control and so forth. ● The type is secured at both ends with leader tape. At the beginning and end of the tape, nothing will be recorded for seven seconds.
Specifications English AMPLIFIER Output power .................................... 1200 W PMPO 2.0 CH mode ................................... 2 X 30W RMS Frequency Response . 100 Hz - 10 kHz / ± 3 dB Signal-to-Noise Ratio > 62dB (A-WEIGHED) Output Sensitivity Line Out ............................................................. 2+ 0.2 V TUNER Tuning Range ........................................................................... ............................................................ FM 87.
English Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
Troubleshooting English Problem Solution The language for the sound or subtitle cannot be changed when playing a DVD. ✔ Multi-language sound or subtitle is not recorded on the DVD. ✔ Changing the language for the sound or subtitle is prohibited on the DVD. No image is output when a function is selected. ✔ Make sure the component is connected correctly. ✔ Press the correct function button for the input source. Sound cannot be heard or is of poor quality ✔ ✔ ✔ ✔ Adjust the volume.
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV set, Stereo, etc.).
English Meet Philips at the Internet http://www.philips.
