INDEX l English = | Franglais Espalier el Warranty oo 101 Australia/New Zeatand/Mexico CLASS 1 LASER PRODUCT
GENERAL INFORMATION SAFETY INFORMATION General la formation # The type plate which contains the serial number) is located at the rear of the system. * Recording is permissible if copyright or other rights of third parties ate not infringed. Environmental Information All unnecessary packaging material has been omitted. We java done our utmost te make the packaging easily separable into three menu-materials: cardboard {boy), polystyrene foam {buffer) and polythene (bags, protective foam sheet).
PREPARATION Antenna Connection Connect the supplied loop antenna to the AM AERIAL terminal, Place the Al lap antenna far away from the system and adjust its position for the best reception. ® FM Wire Antenna Connection Conn act the supplied FM wire antenna to the FM 750 terminator, Adjust the position of the FM antenna for the best reception. Outboard Antenna For hatter FI stereo reception connect an outdoor FRI antenna to the P4 AERIAL 75 ©2 terminal! using a 752 coaxial wie.
ANTHROPOLOGICAL o) _Dolby Pro Logic ) This state of the art Dolby Pro Logic mini system enables you to experience and enjoy a Home Cinema sound ambiance. The Pro Logic system allows more accurate definition of the individual sound sources. It produces renter sound separation between channels and provides ‘pinpoint song localization. Pro Liege provides four outputs which are called Left, Center, Right and Surround {Rear).
DOLBY PRO LOGIC | = "TEST TOE" followed by * ARIA INTERLACE, TENDER AMMO REAR LEVEL" will b displayed. = The test signal will last for about 90 seconds. Cross the BALANCE L to adjust the desired sound level of front lat speaker. ~ The display will show BRA L+2. Press the BALANCE R 1o adjust the desired sand revel of front right speaker, = The display will show BFL £ +3X, o § Crass the CENTER adjust the sound Revel of center speaker.
CONTROLS Centrals on the system and remote control D STANDBY-ON 10 switch the system on of to standby mode. RECORD 10 start recording on tape dock 2. DIGITAL SOUND CONTROL {DSC} 10 defect the desired sound effect: OPTIMAL, CLASSIC;ROCK, TECHNO, PERSONAL 1, PERSONAL 20r PERSONALS. DIGITAL SOUND CONTROL DISPLAY PANEL to view the selected DSC setting. DOLBY PRO LOGIC CONTROL DISPLAY PANEL 1o view the selected Dolby Pro Logic setting.
Digit 0-8 — {numbers consisting of two figures must be keyed in within 2 seconds.} ~ keratin CD track, preset radian station ara TV channel, TEST TONE 1o check the sound level for Front Left, Front Right, Center and Surround speakers respectively. CENTER o adjust the sound level of the center speaker. REAR /= . ‘o adjust the sound level of the surround speakers. BALANCE 1o balance the sound level of the Front Le Rt and Right speakers. SHUFFLE to play al the available sides and their tracks in random order.
OPERATING THE SYSTEM Important: Fora you begin operating the system, complete the preparation procedures, Demonstration mode ‘The system has a demonstration mode that shows the various features offered by the system. Whenever the story is switched an from the wall socket, the demonstration mode will story automatically Notes: « During demonstration mads, If you press any source for standby-on] button, the System will switch to the repetitive for standby) mode.
PERMITTING FURTHEST \ Incredible Surround | Normal stereo sound is determined by the distance =) between the front speakers. When Incredible Surround is switched on, it magnifies the virtual distance between the front speakers for an incredibly wide enveloping stare affect. * Press INCREDIBLE SURROUND to switch on. — The INCREDIBLE SURROUND bunion lights up. — "CREDIBLE SURROUND” willies displayed. To switch off Incredible Surround * Press Incredible SURROUND again.
= age BETEL Cl Warning! 1) This system is designed for conventional CDs. Da not use any accessories like disc stabilizer tings or OO treatment heels, tee, which may damage the LD mechanism, 2} Bo fondant mare their gae dies into each tray. 3} When the CD changer is loaded with Codfish, do not turn over or shake the system, This may jam the changer mechanism, You can load up to three discs in the CD changer for continuous playback without interruption, Loading the CD Changer Press €D to select £D mode.
Dir eat Play You can play a U directly by pressing the 3 €O BISECT PLAY {1 -3) buttons. The £D player wilt stop at the end of playback of the selected disc. — When the button is green, it indicates that there Is no dist loaded in the disc tray. — When the button Is red, it indicates that there is a dies {loaded in the dies tray, Playing €O Press PLAY ¥ to start playback. ~ The disc tray, track number and stapled playing time of the current track appear on the display.
cb Notes: — If the foil playing time is more than “HER" orig ong of the programmed tracks has a number greater than 30, then ~ " appears in the display instead of the total playing time. ~ During programming, if no Bitten Js pressed within 20 sands, the system will exit program mode automatically. Playing the program 1 Tress PLAY P 1o stent program playback. ~ “FLAY PROTEAN" appears on the display, = The track number and elapsed playing time of the represent track will appear on the display.
FORESEER] v PR PESTER Mingus to roadie stations ~ w . Press TUNER to select TUNER mode. = “MUTER" will be displayed. A few seconds later, the current frequency o the. radio station name if available will be displayed. Press TUNER (BAND) again to select the desired waveband Press TUNING 4« o7 for mote than ong second, e release. =+ The display will show "REFRESH' until a station with sufficient signal strength is found. Repeat this procedure until the desired station is reached.
TUNER * Repeat the above procedure 1o stare other preset Stations. Iotas: ~ Cross STOP W to cane] programming. ~ Outing programming, if no button is pressed within 20 seconds, the system will exit progress mode automatically.
T TAPE 1 Loading a tape * Tress OPEN. + The tape deck door opens. « Load the tape with the open side downward and the fut spool ta the left. « Close the taps deck door. Tape Playback 1 Press TAPE to select TAPE mode. TAFFETA t*or*TAPE 2" will be displayed. * Press TAPE again ta select either tape deck 1 or tee deck 2. 2 {oad the gape into the selected tape sack, 3 dress PLAY P to stat playback. 3a for Tape Deck 2 only) Press SIDE AB to switch playback between sides A and B.
TAPE Auto Reverse Playback font on tape deck 2} * Tress REV MODE to select the different play modes. seconding or playback on one side of the tape. The tape stops at the end of one side. Y recording o playback on both sides of the tape, The tape then stops. (o] continuous playback on both sides of the tape up t0 a maximum of 26 times per SIDS unless you press STOP M.
GLOVE 4 helm T fi ‘ Karaoke (ot available for version /30) Microphone mixing Set the MIG LEVEL control to the minimum fever to prevent acoustic feedback (e.g. a loud howling sound) before you connect the microphone. Connect either 1 ot 2 microphones to the MIG 1 of MIE 2 socket. Press €D, TUNER, TAPE 1 or AUXIN. Play the selected source.
fifil k ELISE Timer Setting + The system can switch on to CD, TUNER or TAPE 1 mode automatically at 4 preset dims, It can serve as an alarm to wake you up. After half an hour from the preset time, the system wil rectum to the standby mod i no Hutton is pressed. Before setting the they, make sure the cluck is set correctly. ‘The timer has to b reset or start again for sate subsequent preset time, The value of the dimer will bs at the last setting Pinafore the set is switched to standby mode.
RECORDING VAR Mt i SYSTEM iris. RECOMMENDED THAT YOU SWITCH OFF DOLBY PRO LOGIC WHEN RECORDING. Notes: — if you dlo not intend t record via the microphone, unplug the microphone o avoid accidents! mixing with other recording Source. — For recording, use only tape of IEC type Normal taps] ar €€ type i {Chrome], ~ The tape is secured at both ends with deafer tape. At the beginning and end of tape, nothing will be recorded for six to seven seconds.
RECORDING MAINTENANCE Dubbing tapes firm tape deck 1 to tape deck 2} T Press TAPE to select tape sack 2. 2 Pad the prerecorded tape into tape deck 1 and & Blank rope into tape deck 2. Press SHOE on the remote contra to change the desired direction of the play mode.
TROUBLESHOOTING Warning! Andes no circumstances should you fry ta ropier the System yourself, as this will invalidate the warranty, * Ifa fault occurs, cheek the points sifted blow before taking the system for repair, * Should any problems persist after you have made {hes checks, consult your nearest dealer or service canter, €D Player Operation MG D is displayed, * The dies is inserted upside down. = Pace 00 with printed site up.
AUSTRALIA — Philips product warranty for Australia Warranty conditions valid for Co lour Television, Video Cassette Recorders, Audio Systems, and Portable Audio. “The benefits given to the purchaser by this warranty are in addition 1o alf other sights and remedies which the purchaser has in spaciest of the product under the Trade. Fracas Act or other Commonwealth or State Law. Philips Sound and Vision warrants it's products to the purchaser as follows and subject to the stated conditions.
