[Norse Types kilt finned pd separateness backside. Observer: Erythrocyte er underskirt incomplete. Den grinned deletion er fodder kike droplet ninetieth s& ledge parapet er sluttish nettkontakten. Italian MARCHIONESS DI CONFORMITY' Si radicchio che Apparatchik FEWNESS Philips derision all prescription dell'art. 2 comma 1 del D. M. 28 Agonist 1996 n.
INDEX busybody Supplied accessories Demonstration mode Environmental information CONTROLS INSTALLATION Before you Connections Speaker connections REMOTE CONTROL BASIC FUNCTIONS Switching the system on and System display and buttons Adjusting the display illumination SOUND CONTROLS. TUNER...
CONTROLS 1 English ey W sagging” emend N [Front panel | 1 EJECT .t0 open the cassette holder of TAPE 1 71 OPEN/CLOSE ...to open and clods the CD tray 2 VOLUME .to adjust the volume level J PHONES 3.5 mm headphones socket Inserting the plug will disconnect the speakers. 4 POWER . to switch the set on and to standby WHEN THE SET IS IN THE OFF POSITING {STAND-BY}, THE APPARATUS IS NOT DISCONNECTED FROM AC SUPPLY MAINS. & DB. ...
INSTALLATION mystify Audi Out T . < speaker speaker box box = [Before you start [Connections » For users in the UK. : pleads follow the instructions on page 2. * After unpacking the system, remove all protective material. *» Before connecting the system to the mains, cheek if the mains vantage as shown an the type plate corresponds to your focal mans voltage.
INSTALLATION REMOTE CONTROL [Speaker connections ] One of the two wires of a loud-speaker cable is marked, e.g. with a color or rib. 1 The marked wire should be connected to the red terminal and the unmarked one to the black terminal. 2 Make sure that the color combination of wire and terminal is the same for each loudspeaker. Positioning of the speakers » You will find the best speaker position by experimenting. Placing the speakers on the floor will increase the bass response.
BASIC FUNCTIONS [Switching on and off/standby ] [Adjusting the display illumination ® o To switch on the unit, press DOWER on the unit or any sound source button an the unit or on the remote control. —» The display illumination comes up with full intensity. The selected sound soiree is indicated on the display and the respective LED indicator above the sound sauce button lights up. « To switch the unit to standby mode, press POWER on the unit or STANDBY on the remote contra.
SOUND CONTROLS [VOLUME Adjusting the volume For high precision adjustment, the volume is designed with an endless rotary movement. Adjust the volume to a higher or lower elev) by muting the VOLUME control clockwise or counter clockwise. [ANALYZER — Spectrum Analyzer ] The graph bars in the center of the display show the sound levels. The spectrum analyzer shows continuously the actual frequency distribution of the current sound.
TUNER ysiibuy [Tuning to radio stations 1 Press TUNER on the unit or on the remote control. First TUNER appears on the display and after a few seconds it will show the current frequency o the station name if available. The available display button functions fight up: 2 Select the desired waveband by repeatedly pressing BAND. 3 Hold down TUNING the remote control} until you approach the required frequency. —» As long as the button is pressed, the digits on the display change according te the frequency.
TUNER [RECORD TAPE soon as you press RECORD TAPE @, the current sound will be recorded on TAPE 2, provided a tape suitable for recording is goaded. 2 o stop recording, press M {or STOP # on the remote control]. [Switchable U waveband {not on elf versions) ] Some countries do not have a LW waveband. In some versions it is possible ta delete {include} the LW waveband from the BAND man. * Press BAND to switch to AM, * Keep the sound source button TUNER pressed for more than sec.
CD PLAYER Playing CD | 1 Press CD on the unit or on the remote control. Briefly LD appears on the display. If there the CD tray, the display will then show ND BIS. The available display button functions light up: fuggy 2 Press OPEN-CLOSE on the unit to open the G0 tray. ~» The display shows GEN. 3 Inserts OB, printed side up. Use only Digital Audio CDs, 8 cm CDs can be played as well. 4 Close the tray by pressing OPEN-CLOSE.
CD PLAYER [REPEAT repeating a track or the entire CD ] [SHUFFLE ~ playing in random order ] 1 Press REPEAT on the unit several times until the desired option is displayed: REPEAT: The current track is played repeatedly. REPEAT ALL: The entire CD {or program} is played repeatedly. ~» During play: The selected repeating mode is automatically executed. |13 the stop position: press ™ to start D play.
TAPE DECKS m| [Inserting a tape [Fast winding = ‘g: 1 Press EJECT to open the During playback — cassette compartment, 1 Hold down 019> 2 Insert the tape with the open side down. The display shows Z58. ~m The deck detects the presence fi of a tape in the cassette compartment and automatically selects the tape type (NORMAL or Cr0,). [Playing a tape 1 Press TAPE 1 or TAPE Z on the unit or on the remote control, -~ Briefly TAPE 1 or TAPE 2 appears on the display.
TAPE DECKS ' {General information on recording ] Ra cording is permissible insofar as copyright or other rights of third parties are not infringed. At the very beginning and end of the tape, no recording will take claps during the 7 seconds when the leader tape passes the recorder heads. ~ When a recording Is active, most functions are disabled, RECORDING ACTIVE will appear on the display when a wrong button is pressed.
® TAPE DECKS CLOCK / TIMER [Dubbing tapes {copying from Tappet TAPE] | [General 1 Insert a recorded tape into deck 1 and a blank tape into deck 2. ysijbugy 2 Press TAPE 1 to prepare the deck for dubbing: « Select the tape side by pressing SIDE: FRONT or BACK. « Select the play mode by pressing PLAY MODE unit the desired indicator fights Press TAPE 2 to prepare the deck for recording: * Select the tape side by pressing SIDE: FRONT or BACK.
CLOCK / TIMER Setting the timer for a radio recording [At the preset start dime ] 1 Insert @ blank tape into deck 2. 2 Press TIMER/CLOCK to enter the timer/clock mode. -» The timer/clock display appears. 3 Press REC TIMER to enter the timer setting mode. —» The function indicator REC TIMER starts flashing and a radio preset appears. 4 Press A or ¥ until the desired preset station is indicated. § Confirm the preset station by pressing REC TIMER, The message ON and . LA the time appear.
MAINTENANCE TECHNICAL DATA ysijbug [General maintenance ] * Do not expose the set, CDs or tapes to humidity or rain, sand or to excessive heat caused by heating equipment or direct sunlight. * The mechanical parts of the set contain self-lubricating bearings and must not be golfed or lubricated! » You can clean the set with a soft, slightly dampened chamois leather. Da not use any cleaning agents as they may have a corrosive effect.
TROUBLESHOOTING « If a faultlessness, first check the points sifted below before taking the set far repair, * If you are unable to remedy a problem by following these hints, consult your dealer or service center. WARNING: Under no circumstances should you try te repair the set yourself, as this will invalidate the guarantee. English PROBLEM POSSIBLE CAUSE REMEDY No power _ Mains Jed is not securely connected, Connect the mains lead properly. No or poor sound VOLUME is not turned up. Turn up the VOLUME.
