1. GENERAL ladybug THANK YOU FOR SELECTING THIS PHILIPS SYSTEM This state-ugh-the-art WiFi mini stereo system offers you the fayest technology, high quality sound and an extreme user-friendly operation thanks to its serge display which contains an advanced interactive user interface. RECYCLING « All redundant packaging material has been omitted.
2, SYSTEM SURVEY 789 SYSTEM CONTROLS 1 REMOTE SENSOR infrared remote control eye 2 System display and buttons 3 SOURCE SELECT pass agar and again to select the sound source 4 OPEN A for opening the deck 1 cassette holder 5 cassette holders 6 OPEN A for opening the deck 2 cassette holder 7 POWER ON/STANDBY for waking up the system or switching it 10 the standby mode B TIMER for selecting the timer function § DBB forenoon) Dynamic Bass Boost, for enhancing the bass tones 10 VOLUME contra with STANDBY indicato
3. CONNECTIONS ys1bug digital CC counteract CASSETTE BACK PANEL SYSTEM CONNECTION CABLE 1 PONG input sacks ts for & record player with magneto-dynamic pick-up Ba fore connecting or disconnecting, always switch the system to STANDBY cartridge .G . . connect the flat system connection cable to both CCD CONNECTORS g enliven 2‘: {ECO‘? planar . Insert the plug into the connector until it clicks firmly in place. analog input caskets for an textual sound source. e.q.
3. CONNECTIONS AUX PLAY/REC AUX PLAY input sockets for amplifying or recording the signal from an external sound source, 89 3 TV, dives recorder, BCC deck etc. « Connect the AUX PLAY input caskets to the sockets LINE OUT, AUDIT OUT, or ANALOG UT of the other set, left to left {) end right to right (R, AUX REL output sockets for linking the system signal to textual equipment, €4 recorder, amplifier, DCC deck atc.
4. SYSTEM SET-UP busybody SWITCHING THE SYSTEM ON AND OFF {Stand By} When connected to the mains, the system is always energized. To switch off the mains supply completely, pull the mains plug out of the wall socket. ‘Waking up the system = The normal way to wake up the system is by pressing the button POWER ON/STANDBY or SOURCE SELECT or a sauce select button on ths remote control. The display illumination lights up.
5. REMOTE CONTROL 6. SOUND CONTROLS 2x15V RO3/UM4 / AAA Ii« Gen the battery compartment and insert two batteries, type RO3, UM-d or ABA cells, as indicated shove. « Remove the battened when they have run down or if they will not be used again for 3 long pried.
7. TUNER Lustful GENERAL OPERATION PRESET RADIO STATIONS . Select the tuner by pressing the SQUABBLE SELECT button several times You can store up to 30 preferred radio stations in the memory. OVt O L gt going o rest radio stations ¢an bie stored anticlimactically in the memory. i less than « When 3 non-stored frequency is required, select the band by pressing thirty radio stat ‘round on the £ band.
7. TUNER Selecting a press radio station There are several options to select a preset radio station: # O the tuner, press PRESET <€ » until the desired preset radio station appears on the display. « (n the remote control, pass mor until the desired preset radio station appears on the display. # On the remote control, press the digit numbed 16 form the desired preset number. Presets consisting of two figures must be selected within 2 seconds, otherwise only the first number will be defected.
8. TAPE DECKS mystify COMPACT CASSETTES CASSETTE PLAYBACK en tape 1or2 » At the very beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the recorder heads. + To prevent the accidental erasure of 4 recording, {48 keep the cassette side to be safeguarded in front of you and break out the left tab. Now, recording on this side is no finger passable, To render this safeguard ineffective, cover the aperture with a piece of adhesive tape.
8. TAPE DECKS PREPARING TAPE 2 FOR RECORDING Notes: 1. Recording is only possible o TARE 2. 2, Tuning recording, do not wind o rewind the cassette in TAPE 1, since this may affect the recording quality. . 3. When going to STANDBY during recording or dubbing, recording will stop. Select TAPE 2 using the SOURCE SELECT button or the remote control, The source TAPE 2 appears on the display.
9. CD PLAYER ladybug GENERAL PLAYBACK Select £ using the SOURCE SELECT button or the remote control. The source CO appears on the display. » Press OPEN/CLOSE A on the CO player to open the CD compartment. The message OPEN appears on the display. = insert CO, printed side S facing up. K » Press OPEN/CLOSE to close the compartment {or push briefly against the front of the fE CD tray).
9. CD PLAYER SHUFFLE PLAY IN RANDOM ORDER SHUFFLE plays alf tracks of the CD or CO program in 3 random order. * From the Player STOP-position, press SHUFFLE, The message SHUFFLE appears and an at random selected track is played. * If you press e rover, an already played wrack is repeated {PREVIOUS} or ang of the NEXT tracks {at random} s played, To leave the SHUFFLE-mode, press SHUFFLE again 6 rectum to normal play. SHUFFLE disappears from the display. * To stoop playback, pass M.
10. CLOCK/ TIMER versify SET CLOCK Sensing the time-of-day ‘The clock shows the day of the week and the time. It can be set to 3 12-hair 1r 24-hour clock format. fn the standby mode, day and time are displayed, but the display illumination is switched off. The clack display will flash if the time-of-day has not been set, or if the ‘goer supply was interrupted for finger than 10 minutes. « Press the TIMER button to enter the RIVET mode. The timer display appears. « Pres SET CLOCK. The day appears.
10. CLOCK/ TIMER SET NEWS The news function will interrupt any playing source and switch 0 2 programmed radio station in order to listen to the news, You have to programmer the desired ratio news station and the start/stop time {only the minutes).
11. MAINTENANCE 12. TECHNICAL DATA ) SYSTEM MAINTENANCE 3 busybody « The mechanical pants of the D player and the encase decks contain supplicating hearings and must not be outed or lubricated. » A chamois leather slightly moistened with water is sufficient for cleaning the system.
13. TROUBLESHOOTING TROUBLESHOOTING 1fa fault occurs, first cheek the points sifted below before taking the system for repair. 1 you are unable to remedy 3 problem by following these hints, consult your dealer or service center. i any repair is needed, always definer the complete system font ably one unit} at your dealer or service center, WARNING Under no circumstances should you try 1o repair the system units yourself, as this would invalidate the quarantines.
