PHILIPS FW530C FW 535C FW570C Mini HiFi System *0 0 0 0 3 9 4 0 Instructions for use Mode d'emploi Instrucciones de manejo Bedienungsanleitung Gebruiksaanwijzing Istruzioni per l'uso Brugsanvisning Bruksanvisning Käyttöohje Manual de utilizagäo OöriYfeti PHILIPS
№»« Kakano OtlASCtl îtiHÇ»« Swn*» Qana^ SuOTi '
f: f Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse 2 Fix new fuse which should be a BS1362 5 Amp, A S T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place If the mams plug contains a fuse, this should have a value of 5 Amp.
Suomi......................................184 Portugués................................ 206 BAAnviKÓ............................
CONTENTS I g: Page _y General Information......................................................................... 7 Safety Information............................................................................ 7 Preparation.....................................................................................8-9 Controls......................................................................................10-11 Operating the system............................................................. 12 -13 CD...
GENERAL INFORMATION General Information • The typeplate (which contains the serìai numher) is iocated at the rear of the system. • Recording is permissihie if copyright or other rights of third parties are not infringed. • This product compiles with the radio interference requirements of the European Community. Environmental Information__________________ All unnecessary packaging material has been omitted.
PREPARATION Rear Connections f:
PREPARATION Note: @ AM Antenna Connection_________________ (B) FM authority. Wire Antenna Connection Connect the supplied FM wire antenna to the FM 75 П terminal. Adjust the position of the FM antenna for the best reception. Outdoor Antenna For better FM stereo reception connect an outdoor FM antenna to the FM AERIAL 75 ii terminal using a 75 Й coaxial wire. (c) Speaker Connections_____________________ • Connect the right speaker to Front terminal R, with the red wire to + and the black wire to —.
CONTROLS 28 13 M 19 20 II 22 10
CONTROLS Controls on the system and remote control_________________________________________ m STANDBY-ON - to switch the system on or to standby mode. - to store radio stations automatically by pressing and holding for 2 seconds (only in Standby or Demonstration model. m RECORD - to start recording on tape deck 2 only. [3] REVERSE MODE - to select the different playback mode on tape deck 2 only. GO CLOCK-TIMER - to view clock, set clock or timer. [5] NEWS - to hear news at a preset time automatically.
OPERATING THE SYSTEM Switching the system ON • Press STANDBY*ON (on the system only). CD. TUNER, TAPE or AUX. You can also stvitch on the system by pressing any one of the 3 CD DIRECT PLAY buttons. Switching the system to standby mode • Press STANDBY»ON again. Selecting the Source • Press the respective source selection button. CD, TUNER. TAPE or AUX — The display indicates the selected source Important Before you begin operating the system, complete the preparation procedures.
OPERATING THE SYSTEM Sound Control VOLUME ADJUSTMENT Adjust VOLUME to increase or decrease the sound level. For Personal Listening Connect the headphones plug to the ¡Til socket at the front of the system. The speakers will be muted. INCREDIBLE SURROUND Normal stereo sound is determined by the distance between the front speakers. When Incredible Surround is switched on, it magnifies the virtual distance between the front speakers for an incredibly wide, enveloping, stereo effect.
CD Warning! 1) This system is designed for conventional CDs. Do not use any accessories like disc stabilizer rings or CD treatment sheets, etc., which may damage the CD mechanism. 2) Do not load more than one disc into each tray. 3) When the CD changer is loaded with CD(s), do not turn aver or shake the system. This may jam the changer. You can load up to three discs in the CD changer for continuous playback without interruption.
CD 3 CD Direct Play You can play a CO directly by pressing the corresponding 3 CD DIRECT PLAY (1 - 3) button. The CD player will stop at the end of playback of the selected disc. — When the button is lighted, it indicates that there is a disc loaded in the disc tray. Playing a CD 1 Press PLAY ► to start playback. — The disc tray, track number and elapsed playing time of the current track appear on the display. — The LED on the respective 3 CD Direct Play button will be flashing.
CD .'I - During programming, If no button is pressed within 20 seconds, the system will exit program mode 'J automatically. Playing the program_________________________ 1 Press PLAY ► to start program playback. — "PLfiy PffOGRFIfr will be displayed. — The track number and elapsed playing time of the current track will appear on the display. • If you press REPEAT during program playback, the current track will be played repeatedly. — The REPEAT and PROGRAM flags will be displayed.
TUNER - If RDS station does not transmit RDS time within 30 seconds, the program will exit automatically and the display will show “NO RS5 TIflE". S’ Tuning to Radio Stations_____________________ 1 Press TUNER to select TUNER mode. — "TUNER" will be displayed. — The preset station number, frequency and waveband appear on the display. 2 Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. 3 Press TUNING ◄◄ or^ for more than one second, then release.
TUNER Storing Preset Radio Stations_______________ You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER. 2 Press TUNER (BAND) again to select the desired waveband; FM, MW orLW. 3 Press PROGRAM for more than one second. — PROGRAM flag starts flashing and “RLITD“ will be displayed. -* Every available radio station will be stored automatically.
TUNER Receiving RDS radio station fp,___________ RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along RDS Time Some RDS station may be transmitting a real clock time at an interval of every minute. with the regular FM radio signal. This additional information can contain: Setting the time with RDS clock 1 Press CLOCK'TIMER. • STATION NAME: The station name is displayed. • FREQUENCY: The frequency of the station is displayed.
TAPE Loading a tape Press OPEN. The tape deck door opens. Load the tape with the open side downward and the full spool to the left. Close the tape deck door. Tape Playback 1 Press TAPE to select TAPE mode. — ‘TP,PC Tor TAPE 1?° will be displayed. • Press TAPE again to select either tape deck 1 or tape deck 2. 2 Load the tape into the desired tape deck. 3 Press PLAY ► to start playback. 3a (For Tape Deck 2 only) Press SIDE A*B to switch playback beKveen sides A and B.
TAPE AUX Auto Reverse Playback (only on tape deck21 • Press REVERSE MODE to select the different playback modes. ^.............................recording or playback on one side of the tape. The tape stops at the end of one side. .....................recording or playback on both sides of the tape. The tape then stops. .................. continuous playback on both sides of the tape up to a maximum of 20 times per side unless you press STOP ■.
RECORDING Notes: - Only ^ or mode is available during recording - During recording, it is not possible to listen to another source. Dubbing tapes (from tape deck I to tape deck2) 1 Press TAPE to select tape deck 2. 2 Load the prerecorded tape into tape deck 1 and a blank tape into tape deck 2. -* Make sure that the tape in tape deck 1 has its full spool to the left.
RECORDING CLOCK CD Synchro Start Recording_________________ I Load a blank tape into tape deck 2 and a disc into the disc tray. Z Press CD to seiect CD mode. • You can program the tracks in the order you want them to be recorded (see Programming Tracks). If not, the tracks are recorded according to the selected disc. 3 Press RECORD to start recording. — The REC flag starts flashing. • CD wili start playback automatically. 1 Press STOP ■ to stop recording.
TIMER Tinier Setting • The system can switch on to CD, TUNER or TAPE 1 mode automatically at a preset time. It can serve as an alarm to wake you up. After half an hour from the preset time, the system will return to the standby mode if no button is pressed. • Before setting the timer, make sure the clock is set correctly, • The timer has to be reset or start again for each subsequent preset time. • The volume ef the timer will be at the last setting • At the preset time, the TIMER will be activated.
SPECIFICATIONS Specifications_________________________________ AMPLIFIER Output power FW530C......................................................... 2X100WMPO/ 2 X 50 W RMS, 6£2,1 kHz, THD10% FW535C............................................................... 2x100WMPO/ 2 X 50 W RMS, en, 1 kHz, THD 10% Surround Channel................ 15WMP0/7WRMS FW570C............................................................... 2x200WMPO/ 2 X100 W RMS, 6£2,1 kHz, THD 10% Signal-to-noise ratio........................
"Maet PHILIPS at the internet http://www.philips.
