[ Important notes for users in the UK: Mains Plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this ype of plug proceed a8 follows: « Remove fuse cover and fuse. « Fix new fuse which should be @ 8513625 A PASTA. or BSI approved type. « Refit the fuse cover. It the fitted plug s ot suitable for your socket outlets, it should be cut off and an appropriate plug fetid in its place.
synfuel General Information/Safety Information General Information The type plate is educated at the rear of the set. Recording is permissible if copyright or other rights of third parties are not infringed. All unnecessary packaging material has been omitted. We have done our utmost to make the packaging says to separate into three mono-materials: — cardboard {box} — expandable polystyrene {buffer} — polyethylene {bags, protective foam sheet).
Preparations Rear Connection Antenna Connection (© Connecting other equipment to your system Connect the supplied loop antenna to the AM AERIAL terminal. You can connect TV, Laser Duse or VCR audio left and right Adjust the position of the AM loop antenna for the best reception. outputs to the AUX terminal at the rear of the system. FM Wire Antenna Connection ® AC Power Supply Connect the supplied FM wire antenna to the FM 75 £ terminal.
1 POWER ON ~ 10 switch the set on or to standby mode. 2 SOURCE SELECTION — o select the fallowing: TUNER : to switch to Tuner mode. D + to switch to CD mode. TAPE 1-2: ta switch to Tape 1 or 2 made. AUX < to switch to AUX mode (for external sources, e.g. TV, Laser Disc or VCR sound). 3 MAGIC MENU USER INTERFACE AND DISPLAY ~ 1o select the control functions. 4 CLOCK
ysibuz Operating the System PHILIPS ey CEDE important: Before you begin operating the shyster, complete the preparation procedures. The set is in the standby mode when the AC power plug is connected to the wall kickstand 7 -2 flashes on the display. Switching the system ON « Press POWER ON, GD, TUNER, TAPE 1-2 or AUX {or €D, TUNER, TAPE 1 or TAPE 2 on the remote control. Switching the system to standby mode * Press POWER ON again {or ¢ on the remote courtroom.
Tuner PHILIPS Tuning to radio stations 1 Press TUNER on the unit or on the remote control. — First TUNER appears on the display and after a few seconds it will show the current frequency or the station name if available. The available display button functions fight \(ED Press BAND to select the desired waveband: font for aff versions). 3 Press TUNING <« or W for more than one secant. The display wolf show ‘SEARCH" until a station with sufficient signal strength is found.
stinkbug Tuner Tuning to Preset Stations O =finm3~9550h@ LAY Press PRESET PERV [ or NEXT »| on the remote control) 1o select the desired preset number. -~ The preset number, frequency and waveband appear on the display. T M & Record Tape 1 As soon as you press @ RECORD, the current sound will be recorded on TAPE 2, provided a tape suitable for recording is loaded. 2 To stop recording, press W {or STOP M on the remote control.
Loading a cassette * Press OPEN. * The cassette compartment door opens. * Load the cassette with the open side downward and the full spew! to the left. « Close the cassette compartment doge. —~ The deck automatically selects the tape type NORMAL or CHROME Tape Playback e 1 Press TAPE 1-2 {or TAPE 1 or TAPE 2 on the remote control} to selectivity TAPE 1 or TAPE 2. % load the cassette into the desired CASSETTE DECK. 3 Press PLAY P {or PLAY P on the remote control) to start playback.
ysyifiug Cassette Deck Fast Forward/Rewinding 1 You can rewind or fast forward the tape by pressing < or PP, (««or PP on the remote control} respectively. 2 Press STOP M {or STOP W on the remote control} to stop fast forwarding or rewinding. Tong; {tis possible to fast forward or rewind a cassette when the set is in another source mode {e.g. TUNER, CD or AUX mode]. Recording from other sources (TAPE DECK 2) % sz Press TAPE 1-2 to select TAPE, Load a blank cassette into TAPE DECK 2.
Note: The program is else erased when the set is discontented from the power supply. If the CD carousel is opened, the tracks belonging to the outer two trays will be erased and “CLARET T will scroll on the display once. Synchrony Start Recording Dunn €D synchrony start retarding, it is not advisable to fast forward/rewind your cassette in TAPE DECK 1. * iris not possible to fasten to another sound source. Press €D 1o select 0. Load & disc anti the disc tray.
Clock Setting fuggy 18 PHI UPS Setting the clock i The clock will display in 24-hour mode, e.g, 8548 ord 3:55. 1 Press CLOCKS TIMER. — “3:08" stats flashing. % BEB% Press SET CLOCK. D4 zoom E T T Set the hour with W or A Set the minute with Press SET CLOCK again 1o store the setting, The clock starts running, Notes: When a power interruption occurs, the clock settings are erased, and *0:045° will flash on the display. ~ To set the time with RDS clock, see “RECEIVING RDS RADIO STATION" under TUNER section.
CD Changer Jc0omcr oy L oae @ ©B HANGER Warning! 1 Press G to select CD. 1) This set is designed for conventional CDs. Du not use * 2 Press PENELOPE. any accessories like disc stabilizer rings or CD meantime TheCOcompertmentslidesout. sheets, etc, which may damage the CD mechanism: * Load & disc with the printed side op in the right ray. 2) Do not goad more tin one disc into each tray, » You can load another disc in the left tray.
sy 14 CD Changer « To interrupt play, press ¥1 {or PAUSE Y on the remote control). The playing time flashes. o To resume play, press » again {or PLAY » on the remote control). 2 Elastoplast, press ™ {or STOP M on the remote control. Note: All the available discs will play once, then stop. When the CD has stopped playing, the set will switch to the standby mode after 16 minutes if no button is pressed. ‘When the CD tray is closed, you can play a CD directly by pressing the 3 CD DIRECT PLAY {1 -3} buttons.
Maintenance Maintenance Cleaning the Cabinet * Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.
Troubleshooting Guide Warrant! Nude; no circumstance should you fim terrain} the set yf;urégif, as this will invalidate the warranty. » {fa fault occurs, check the points sifted below before taking the set for repair. » Should any problems persist after you have made these checks, consult your nearest dealer or service center, The TV or VCR Is oo close to the stereo system. Symptom Cause Remedy Radii Reception The STEREO indicator flashes. The signal is too weak. Adjust the antenna.
