Mini HiFi System Downloaded From Disc-Player.
English Important notes for users in the U.K. Français Español Deutsch Nederlands Italiano Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
Italiano .................................105 Svenska ...............................125 Dansk ...................................145 Suomi ...................................165 Português ............................183 CLASS 1 LASER PRODUCT Downloaded From Disc-Player.com Philips Manuals ∂ÏÏËÓÈο ............................ 203 Français Español Italiano Nederlands Deutsch Nederlands ............................85 Svenska Deutsch ..................................65 Dansk Español ..................
English Downloaded From Disc-Player.
General Information .......................... 5 Safety Information ............................. 5 Preparation ................................... 6 - 7 Controls ......................................... 8 - 9 Operating The System ............ 10 - 11 CD ............................................... 12 - 14 GENERAL INFORMATION SAFETY INFORMATION General Information Safety Information • The type plate (which contains the serial number) is located at the rear of the system.
PREPARATION English Rear Connections A B FM AERIAL 75Ω FRONT + – – L + R R AM AERIAL L AC MAINS ~ SUBWOOFER OUT F AUX IN STANDBY ON SU BW O OFER LEVEL CONT RO L MIN MAX CUT OFF FREQUENCY HIGH POWER SUBWOOFER 60Hz C Downloaded From Disc-Player.
You can connect the audio left and right OUT terminals of a TV, VCR, Laser Disc or DVD player to the AUX IN terminals at the rear of the system. • Insert the batteries (Type R06 or AA) into the remote control as shown in the battery compartment. B FM Wire Antenna Connection E Subwoofer Out Connection Connect the supplied FM wire antenna to the FM 75 Ω terminal. Adjust the position of the FM antenna for the best reception.
CONTROLS English @ DISC ! 0 9 8 7 8 DISC 2 DISC 3 DISC CHANGE OPEN • CLOSE 3CD CHANGER RDS OPTIMAL DSC TECHNO STEREO NEWS REPLAY JAZZ FM REC HSD MW DBB IS LW AM PM NEWS! CLOCK TIMER PROGRAM MAX DBB # $ % ^ & * 2 ( ( 2 INCREDIBLE SURROUND REPEAT SHUFFLE PROGRAM TIMER ROCK CD TAPE 1/2 TUNER INC. SURR.
Controls on the system and remote control 1 STANDBY-ON – to switch the system on or to standby mode. – to store radio stations automatically by pressing and holding for 5 seconds. 2 SOURCE : to select the following. CD / (CD 1•2•3) – to select CD mode. When CD in stop mode; to select the disc tray 1, 2 or 3. TUNER / (BAND) – to select Tuner mode. When in tuner mode; to select the waveband: FM, MW or LW. TAPE / (TAPE 1• 2) – to select Tape mode. When tape in stop mode; to select either tape deck 1 or 2.
OPERATING THE SYSTEM English RDS DSC TECHNO STEREO NEWS REPLAY JAZZ FM REC HSD MW DBB LW AM PM CLOCK TIMER PROGRAM MAX REPEAT SHUFFLE PROGRAM TIMER FW 318C DIGITAL SOUND CONTROL CD TUNING TAPE BAND ▲ ▲ ▲ ▲ MASTER VOLUME TUNER CD 1 • 2 • 3 STANDBY. ON EASY SET allows you to store all available radio stations in a particular band (FM, MW or LW) automatically.
Selecting the Source • Press the respective source selection button: CD, TUNER, TAPE or AUX. ™ The display indicates the selected source. Note: – For an external source, make sure that you have connected the audio left and right OUT terminals of the external equipment (TV, VCR, Laser Disc or DVD player) to the AUX IN terminals. Sound Control Volume Adjustment Adjust VOLUME to increase or decrease the sound level.
CD English DISC 1 DISC 2 DISC 3 DISC CHANGE Loading the CD Changer OPEN • CLOSE 3CD CHANGER RDS OPTIMAL DSC TECHNO STEREO NEWS REPLAY JAZZ FM REC HSD MW DBB IS LW AM PM DBB ROCK MASTER VOLUME CD TUNER CD 1 • 2 • 3 ▲ ▲ AUX TAPE 1 • 2 VIDEO ▲ TUNING TAPE BAND ▲ ▲ DUBBING INCREDIBLE SURROUND REPEAT SHUFFLE PROGRAM TIMER DIGITAL SOUND CONTROL STANDBY. ON NEWS! CLOCK TIMER PROGRAM MAX DEMO PRESET ▲ n NORM•FAST RECORD A.
Selecting a desired track Programming Tracks Playing the program Erasing the program (in the stop Selecting a desired track at the stop mode 1 Press PREV í or NEXT ë until the desired track appears on the display. 2 Press PLAY É to start playback. ™ The selected track number and elapsed playing time appear on the display. Programming tracks of a loaded CD is possible in the stop mode. The display will indicate the total tracks stored in the program.
CD TUNER English Shuffle (only on remote control) RDS OPTIMAL It will play all the available discs and their tracks in random order. Shuffle may also be used when tracks are programmed. DSC TECHNO STEREO NEWS REPLAY JAZZ FM REC HSD MW DBB LW AM PM CLOCK TIMER PROGRAM MAX DBB MASTER VOLUME CD TUNER CD 1 • 2 • 3 ▲ ▲ TUNING ▲ ▲ DUBBING TAPE BAND AUX TAPE 1 • 2 VIDEO ▲ STANDBY.
Storing Preset Stations You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER. 2 Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. 3 Press PROGRAM for more than one second. ™ PROGRAM flag starts flashing and ‘AUTO’ will be displayed. ™ Every available station for the selected waveband will be stored automatically.
with RDS) You can activate NEWS function in Standby or any source mode except Tuner mode. Once the News PTY (program type) is detected in a RDS station, it will switch to TUNER mode automatically. RDS OPTIMAL STEREO NEWS REPLAY JAZZ DSC Notes: – During NEWS bulletin, you can press any available source button to cancel NEWS function and execute the relevant source mode. – The NEWS works only once for each activation.
Tape Playback 1 Press TAPE to select TAPE mode. ™ "TAPE 1" or "TAPE 2" will be displayed. • Press TAPE again to select either tape deck 1 or tape deck 2. 2 Load the tape into the selected tape deck. 3 Press PLAY É to start playback. 3a (For Tape Deck 2 only) Press A. REPLAY to select the different type of play mode (see auto replay). 4 Press STOP Ç to end playback. Note: – When the tape has stopped playing, the system will switch to the standby mode automatically after 15 minutes if no button is pressed.
RECORDING English RDS OPTIMAL DSC TECHNO STEREO NEWS REPLAY JAZZ FM REC HSD MW DBB IS LW AM PM DBB DIGITAL SOUND CONTROL MASTER VOLUME CD TUNER CD 1 • 2 • 3 ▲ ▲ AUX TAPE 1 • 2 VIDEO ▲ TUNING TAPE BAND ▲ ▲ DUBBING INCREDIBLE SURROUND REPEAT SHUFFLE PROGRAM TIMER ROCK STANDBY. ON NEWS! CLOCK TIMER PROGRAM MAX DEMO PRESET ▲ n NORM•FAST RECORD A.
CLOCK TIMER CD Synchro Start Recording (only on tape deck 2) 1 Load a blank tape into tape deck 2. 2 Press CD, TUNER or AUX. • Start playback of the selected source. 3 Press RECORD â to start recording. ™ REC flag starts flashing. 4 Press STOP Ç to stop recording. Note: – During recording, it is not possible to listen to another sound source.
TIMER English 5 Press CLOCK/TIMER to store the start time. ™ The TIMER is now set. ™ The TIMER flag remains on the display. • To exit without storing the setting, press Ç. • At the preset time, the TIMER will be activated. ™ The selected source will be played. Notes: – During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. – If the source selected is TUNER, the last tuned frequency will be switched on.
Specifications AMPLIFIER Output power RMS (1) (6 Ω, 1 kHz, 10% THD) .................... 2 x 25 W Music Power .................................................... 2 x 50 W Signal-to-noise ratio ..................................... ≥ 65 dBA (IEC) Frequency response ..................................... 50 – 15,000 Hz Input sensitivity Aux In .................................................................... 700 mV Output Speakers (Left/Right) ..............................................
TROUBLESHOOTING English Warning! Under no circumstances you should try to repair the set yourself as this will invalidate the guarantee. Do not open the set as there is a risk of electric shock. • If a fault occurs, check the points listed below before taking the system for repair. • Should any problems persist after you have made these checks, consult your nearest dealer or service center. CD Player Operation “NO DISC” is displayed. • The disc is inserted upside down. ™ Place CD with printed side up.
