GENERAL INFORMATION Accessories (Sup tied) Safety Information _SAFETY INFORMATION General Information * The type plate which contains the serial ~ Remote control ambergris slotted at the errs of the system. — Batteries (2 x AAA size) for remote control = Recording is permissible if copyright or either — AM lop antenna rights of third parties are not infringed. Fi antenna wire AG power cord Environments! Information Alt unnecessary packaging material has hen emitted.
AM Antenna Connection Connect the supplied lop antenna to the AM AERIAL terming, Lace the AM loop antenna far away from the system and adjust is position for the best reception, (8) FM Wire Antenna Connection Content the supplied FM wise antenna to the FM 75 0 terminal. Adjust the position of the FM antenna for the best reception, Outdoor Antenna Far tether FA stereo reception connect an outdoor FM antenna 10 the FM AERIAL 76 3 terminal using 2 75 Q. coaxial wire.
CONTROLS Controls on the system and remote control {1] STANDBY-GM 1o switch the system on or 1o Standby mode. ~ 1o store radio stations automatically by pressing and {21 ‘holding for 2 seconds, SOURCE : to serest the fallowing. 100 200 3} ~ to select Cl mods. When £0 in stop mode; to select the respective disc tray. = selector Tuner made, When in tuner mode; te select the waveband: Fiv or MW/, TAPE /{TAPE 1st Ape 2} = to select Tape mode.
e sam eIy NS ST o= important: Before you hegemony aerating the system, complete the preparation procedures. Demonstration mode ‘The stern has & demonstration mode that saws the various features offered by the system. Whenever the system is switched on from ihe wall socket, the demonstration mode will start automatically. Nate: — During demonstration mode, if you press any source for stamina-onf button, the System wif switch to the respective for standby] mode.
Selecting the Source * Press the respective source selection button: €D, TUNER, TAPE or AUK. ~ The display indicates the selected source, Data: ~ For an external souses, make sure that you have connoted the audit theft and tight OUT terminals of the external equipment (TV, VR, Laser Disc or DVD Player} to the AUX IN terminals. Sound Control Valium Adjustment Adjust VOLUME to increase or decrease the sound level. For Personal Listening Connect the headphones lag to the §) socket al the grant of the system.
=ce | PR ASTER Warning! 1} This system is designed for conventional CDs. Do not use any accessories like disc stabilizer rings or LD treatment sheets, etc., which may damage the I mechanism, 2} B not load more than one disc anti each tray. 3) When the CD changer is Loaded with Cubist, do not turn over oy shake the system. This may jam the changer. You can Road up fo three discs in the GO changer for continuous playback without interruption. Loading the CD Changer Press B0 10 safest OO mode. Press OPENNESS.
Playing a CD 1 Press FLAY » to start playback, ~ The dies tray, track number and elapsed playing time of the current track appear on the display. » T interrupt playback, press PAUSE IE, -+ Tho playing time Hashes. » To resume playback, pass PLAY » again, 2 To stop playback, press STOP M, Note: ~ Alf the available sides will posy once, then stop. When tho €D has stopped playing, the system will switch to the standby mods after 15 minutes if no button is passed.
co Playing the program =1 Tress PLAY » to start program playback. — "PLY SCHROEDER” appears on the display, ~» The track number and elapsed playing time of the current wack will appear on the display. i#you press REPEAT during program playback, the current track will be played repeatedly. —~ The DEFEAT and PROGRAM figs will be displayed.
o st sy TUNER Easy Set EASY SET allows you to store all available radio stations in a participator band {(Fv or MW} automatically. * Crass and hold STANDBYS fon the system only) far 2 secants; when the system is in standby or demonstration made, -+ "ERG SLT" wilt be displayed and followed by TUNER®, ~+ EASY SET will start with the fast active band. ~ Al available radio stations with sufficient signal strength will be stored or until 40 presets are filled.
TUNER “2 Manual programming 1 Press TUNER. ") 2 Pies TONER (BAND) to select the desired waveband < FM or MWL Press PROGRAM for fess than one second. = PROGRAM flag, the frequency snd preset numbs start flashing. = The next available press dumber will be displayed for selection. Press TUNING tune to the desired piquancy. 1 you wish to store the radii station to another preset sublimer, press PRESET select the desired prates number. Crass PROGRAM again.
oo op ER Loading a tape % » Cross OPEN, o » Thetapedeckdooropens. | | dadoes | » Load the tape with the open side downward and the full spool to the left. Close the tape deck door. Tape Playback 1 Cross TAPE to select TAPE mode. ~ TR PL * or*TAPE 2° will be displayed * Press TAPE again to select either tape deck 1 or gate deck 2. 2 Load the tape into the selected gape deck. 3 Press PLAY » 10 start playback, afford Tape Deck 2 only) Press A.
TAPE AUX Auto Replay fondle tape deck 2 Togas: A ~ Dotting rewinding or fast forwarding of 3 tape, iris « Less A REPLAY st cites encomiums ATTN. eerie st snowman g, 60 SRt x s REPLAY ar ONCE during tape playback. RUT REPLAY® or [NEE” will be displayed. Notes: ~ This feature s available during taps playback only. When FLT REPLY" s selected, the tape will ravine automatically at the end of playback for the selected side, Then it will start playing again.
KARAOKE e RECORDING : Microphone Mixing fort available for version /30 1 Set the MIC LEVEL control 10 the minimum label to prevent caustic feedback (e.g. loud howling sound} fora you connect the microloans. 2 Connect a microphones to the MIC secret. 3 Press CO, TUNER, TAPE or AUX. 4 Play the defected source. & Stadium the volume fee! with VOLUME control. & Adjust the MIC LEVEL contra 1o the mixing label that you want, 7 Start slinging or talking through the microphone.
n RECORDING Note: Wilhelm yous prods RECORD at TAPE mode, 'SELECT OTHER SOURCE ~will be dispelled. One Touch Recording is not possible at TAPE mode, Dashing tapes (iom taps dock 1 10 tape deck) Crass TAPE 1o select tape deck 2. Load the prerecorded tape into tape deck rand & tank tape into tape deck 2. — Mike sure that the tape in tape deck 1 has s full spool to the leR.
o TIMER * At the preset time, the TIMER will be activated. /3— o -+ The selected source will be played. F -+ The TIMER flag disappears from the display. & Notes: ~ During timer setting, if no button is pressed within 97 ‘seconds, tha system will exit timer setting mode automatically. — I the source selects is TUNER, the fast tuned Frequency bill be switched on. = If the source selected is CO, playback bill begin with the first track of the last selected dies.
k3 Maintenance Specifications Cleaning the Cabinet AMPLIFIER « tse 3 soft cloth slightly moistened with & mild Output power detergent solution. Do not use a solution containing POMP. oW alcoholic, spirits, ammonia or abrasives. Signal-to-noise ratio 2T (INCH Frequent response . 50— ISGDBHI +3d8 Cleaning Discs * When a disc becomes dint, clean it o with a cleaning cloth. Wipe the disc P’ 4 from the center out.
TROUBLESHOOTING Waring! Under no circumstances should you try to scapular the system yourself, as this will validate tho warranty, * i acculturates, cheek the points sifted below before taking the system for repair, * Should any problems persist after you have made hes checks, consult your nearest dealer or service counter, €D Player Operation "NO Biscay displayed. * The dies is invented upside down, = Lace 00 with printed aids up. * Moisture condensation at the fens.
Warranty conditions valid for Co lour Television, Video Cassettes recorders, Audio Systems, and Portable Audio. Tha banjoists given t6 the purchaser by this warranty are in addition to aff Luther rights and remedies which the purchaser has in respect of the product under the Trade Practices Act or nether Commonwealth or State Law.
