ACCESSORIES INSTALLATION ACCESSORIES (Supplied) « Do not cover any vents and make sure that there Is a space of several centimeters around the unit for fi Standard items: ventilation. * Remote control transmitter (1x) & » Batteries (24 AAA size) for remote control transmitter — Arrangement of the set w * Loudspeaker boxes {one pair} * FM antenna wire 76 ohms (1x) * AM loop antenna {1x} f Netherlands, | Putsch ' 1 Franglais Important notes for users in the U.K.
CONNECTIONS CONTROLS | stinkbug CONNECTIONS (Fig, 2) A) Terminals for two loudspeakers, minimum impedance 8 tums. Attach loudspeaker cables to the unit (see Fig. 2A). Left speaker :connect the red wire to terminal + L, the black wire to terminal L. Right speaker: repeat the same procedure. B) Terminal for FM 78 ohm antenna. The antenna wire supplied with the unit can be connected to this terminal. Adjust the position of the FM antenna for optimum reception.
CONTROLS TUNER/CD UNIT (Fig. 1) T11R SENSOR Ta receive signals from the remote contra. (see Fig. 8) 12CD (Compact Disc) controls ~ CD SYNCHRONY bitten: automatically start recording the CD source to the cassette. — PROGRAM button: to program the track numbers. To clear a program, press STOP twice. ~ PLAY» PAUSE MIl button: to start and interrupt playback, STOP # button: to stop playback.
OPERATION AMPLIFIER OPERATION Standby Indicator When you first plug the unit into the AC outset, the unit will be switched to standby mode. R 12:00 flashes in the display. — The time will flash until you set the clock. (See Timer and Clock function.) — The standby indicator will light up o indicate that the main units stiff on. — When you press standby power on, the last sound source you selected will appear.
DIGITAL SOUND CONTROL DIGITAL SOUND CONTROL (DSC) The DSC feature creates a realistic atmosphere for the style of music you select using the latest digital sound technology. The unit offers the following DSC modes: — FLAT: for the subtle extension of the music's dimensions. -~ POR: far the electric excitement of stadium pep. ~ JAZZ: for that brassy bite of jazz at close quarters.
PRESETTING STATIONS ys|jbug 12 & Counterweights misplacement, you're receiving a FM-stereo transmitter. Switch to MONO i there is interference noise during FM stereo reception. PRESETTING STATIONS You can press thirdly stations in the memory. When you tune 1o & preset station, the memory allocation number (1-20, 20+} appears next to the frequency on the display. if the number of preset stations exceeds 20, the ornery allocation number will be (21 = Within 3-4 seconds, press 10+ twice followed by 1).
COMPACT DISC COMPACT DISCS (CD} Use compact discs bearing the symbol below. In addition to the conventional 12 cm CDs, 8 USH without an adapter. isE DIGITAL AUDIT Bear in mind the following points, since any dirt, scratches or warping of the disc can cause broken or intermittent sound and also noise. + To remove the disc from its case sift it out by holding the disc’s center with your forefinger and the outside of the dies with your Fig.
COMPACT DISC 14 Selecting a different track during play * Press «« PERV or NEXT» on the unit {or 4 PREVIOUS or NEXT on the remote control} until the required track number appears in the display. rae = Shortly after this, the chosen track will start playing. Starting again with the track that is currently playing * Cross <« PERV on the unit {or 4 PREVIOUS on the remote control) once. The track will start to pay from the beginning again.
COMPACT DISC 2 Press OPEN ¢ CLOSE to remove the OD. & Playing in a desired order (Program} By programming the player, you can play up to 20 tracks in any desired order. If you exceed the maximum of 20 tracks, FULL will appear in the display. 1 Press PROGRAM. among_ raga o ~ The display will show PROGRAM. 2 Press ««PERV or Next» on the unit (old PREVIOUS or NEXT P on the remote control) to locate a particular track.
COMPACT DISC TS 7 Press RECORD noncredit to enter RECORD-PAUSE 141 you press STIR s only on the cassette desk, the CD g" ! mode. The RECORD » MUTE LED fights up and the wolf continue playing. @ : direction play button flashes. wile s SRO sorSun_swrorems o (1) Program recording @ 1 You can per-program the CD tracks for recording, then 2 ‘g% repeat the procedure as mentioned in manual recording. ey {CD tracks more than 20 titles may not show the frack @ number and its foal playing time.
COMPACT DISC € Press CD SYNCHRONY bunion, wazoo s T 7 Thedubbingstaris. The CD menopause 7 seconds before it starts playing. Dubbing a CD — with Edit Features With Edit features, you designate the recording time for one side of the tape only, and then the unit automatically selects tracks from a single disc that can be recorded within the designated recording time. The selected tracks are then edit recorded onto one side of a pale at a time (side A and side B).
CASSETTE DECK 18 CASSETTE DECK GENERAL INFORMATION Copyright: Recording is permissible insofar as copyright or other rights of third parties are not infringed. The tape in the cassette is secured at both ends with deafer tape. At the beginning and end of the cassette, nothing will be recorded for six to seven seconds. — For recording, cassettes of IEC type | should preferably be used. — The recording level is set automatically, regardless of the position of VOLUME.
CASSETTE DECK RECORDING FROM OTHER SOUND SOURCES 1 Set the source salacious button fo select the sound source, (TUNER ar AUX} 2 Insert a cassette in the cassette deck. 3 To record with the Dolby NR system, switch DOLBY B NR bitten on. The corresponding LED lights newcomer pause son pounce auto evenness 4 Press AUTO REVERSE {o select one side or both sides recording. The LED lights up indicating that the AUTO REVERSE is switched on.
OTHER POSSIBILITIES ladybug | 20 TIMER AND CLOCK FUNCTION Setting the Clock during the standby mode. 1 Press CLOCK. g J0: flashes on the display. 2 Press TUNING A or TUNING ¥ to set the current hour. 3 Press CLOCK. 00 now flashes on the display. 4 Press TUNING A or TUNING ¥ o sel the current minutes. 5 Press CLOCK again. — The display will show the set time of the clock. For the 12-hour format: The display will show At 1200 or P11 12:00, B and Pt will fish. [ii7 is the current minute.
OTHER POSSIBILITIES NEWS SETTING 1 Cross NEWS. ngs ~ NEWS, ON and 0C flashes on the display. 2 Press TUNING A or TUNING ¥ 1o set the desired switching on time. 3 Press NEWS to store switching on time. NEWS, OFF and 0} flashes on the display. 4 Press TUNING A or TUNING ¥ to set the desired switching off ime. 5 Press NEWS to store the switching off time, 6 Press PRESET A or PRESET ¥ lo select the desired preset elation. 7 Press NEWS to store the desired preset station.
