CDR Mini Hi-Fi system FW-R7
Important notes for users in the U.K. Italia DICHIARAZIONE DI CONFORMITA’ Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Si dichiara che l’apparecchio FW-R8 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D. M. 28 Agosto 1995 n. 548. 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover.
English Français English ....................................................4 Español Français.................................................32 Deutsch Español .................................................60 Deutsch.................................................
GENERAL INFORMATION English General information Accessories supplied ....................................................................................4 Setup information...........................................................................................4 Maintenance ..................................................................................................4 Environmental information.............................................................................4 Discs for recording ..........
Discs for recording CD(RW) handling For recording, make sure to use special audio discs only. These discs are marked “Digital Audio” and the logos shown below. If the CDR Mini Hi-Fi system fails to read discs correctly use a commonly available cleaning-CD to clean the lenses before submitting the set to repair. Other cleaning methods may destroy the lenses. Always keep the trays closed to avoid dust on the lenses.
CONTROLS AND CONNECTIONS English & 0^ %$ # @ ! 0 9 8 7 65 4 3 OPEN/CLOSE CD CHANGE CD CHAN GER E • 3 CD CHANGER CD REWRITABLE COMPATIBL ANALOG DIGITAL / SUBWOOFER OUT AUX STANDBY ON • TUNER iR SEN CD 1 DIGITAL IN SOR FM AERIA CD 2 NEWS/TA CD 3 RDS FW- R7 CD RECOR DABLE M MINI HIFI SYSTE T CD TEX IMER CLOCK/T ≥ § LINE OUT AUX IN L R L R DIGITAL OUT AM AERIA L 75 Ω L DISPLAY CD-TEXT ~ AC MAINS ∞ EDITING SE OPEN/CLO RS SPEAKE Ω 6 FRONT RDER CD RECO L CDR R
On the front 0 Source selection CD 1, CD 2, CD 3 ..................selects the CD changer, switches to CD 1, CD 2 or CD 3 CDR........................................selects the CD recorder TUNER...................................selects the tuner DIGITAL / ANALOG AUX ....selects the input for an additional appliance ! ...............................................CD changer tray @ OPEN/CLOSE........................opens and closes the CD changer tray # CD CHANGE .........................
INSTALLATION English Mains Antenna connections The type plate is located on the rear of the set. AM antenna The loop antenna supplied is for indoor use only. 1 Check whether the mains voltage as shown on the type plate corresponds to your local mains voltage. If it does not, consult your dealer or service organisation. 1 Fit the plug of the loop antenna to AM AERIAL as shown below. 2 Make sure all connections have been made before switching on the mains supply.
English INSTALLATION CD PLAYER SUBWOOFER OUT DIGITAL DIGITAL IN OUT LINE OUT AUX IN L AM AERIAL R L R FM AERIAL 75 Ω TAPE RECORDER AC MAINS ~ CD RECORDER SUBWOOFER SPEAKERS 6Ω FRONT L R Analogue audio connections Digital audio connections AUX IN L/R It is possible to use an additional appliance, e.g. tape recorder, TV or VCR with the set. DIGITAL IN You can use this coaxial input for recordings from any digital audio equipment with a digital coaxial output e.g. CD player or DVD player.
REMOTE CONTROL 2 ...........................switches the set to standby CDR, TUNER, CD1, CD2, CD3, AUX........selects the sources Number/alphabet keys 1–0 ....................keys in numbers for tracks or stations ABC – XYZ ........keys in letters for text SPACE ...............keys in a space within the text EDIT TEXT ................enters the text edit menu -VOLUME.............decreases the volume +VOLUME.............increases the volume É ...........................starts playback/recording í ..........
DISPLAY This area is used for feedback of the CD changer, CD recorder, tuner frequencies, menu options, values and scrolling text messages. .....current program is being recorded with high speed dubbing and auto finalize FM TUNER ..........FM station is being recorded ............current disc is being recorded with CD=CD high speed dubbing and auto finalize AUX ...................material from an external source is being recorded É .........................playback is activated Å .........................
BASIC FUNCTIONS English OPEN/CLOSE CD CHANGE LE • 3 CD CHANGER CD REWRITABLE COMPATIB DIGITAL / ANALOG AUX STANDBY ON TUNER iR SEN CD 1 SOR CD 2 NEW CD 3 S/TA RDS FW- R7 SYSTE M LE MINI HIFI CD RECO RDAB CD TEX CK/ T CLO TIMER DISPLAY CD -TEXT EDITING OPEN/C CD LOSE RECORDER CDR ST MA RECORD ER VOLUME E S CD CD ND U LO PLAY/ PAUSE SEARCH DSC COMPILE CD SEARCH S ES Y PURE NTROL DN G CO NO JO STOP INC RED IBLE REC TYPE SU RR O U C PR OG ERASE RE
MA RECORD CD CD COMPILE CD SEARCH DSC PURE S S ES E ND U LO PLAY/ PAUSE REC TY INC RED IBLE PE SU RR O U PR OG ERASE DIT MUTE This feature allows you to temporarily switch off the sound without switching off the set. 1 Press MUTE on the remote control to switch off the sound. yMute is displayed and playback/recording will be continued without sound. DN Y VOLUME STER 2 Press MUTE on the remote control again to switch on the sound again.
BASIC FUNCTIONS English Selecting a disc on the CD changer • Press either CD 1, CD 2 or CD 3 to select a particular disc. Selecting a track and searching Selecting a track during playback • Rotate JOG CONTROL (pressí or ë on the remote control) to skip to the beginning of the previous or next track on the selected disc. y Playback continues with the selected track. Selecting a track when playback is stopped 1 Rotate JOG CONTROL (pressí or ë on the remote control) to skip to the required track number.
PROGRAM ST MA RECORD Y E S CD CD 1 If necessary press STOP & on the set (Ç on the remote control) to stop playback. DN S ES COMPILE CD SEARCH U LO PLAY/ PAUSE SEARCH STOP INC RED IBLE PE REC TY C PR OG ERASE RE EDIT LE VE FINALIZE TEXT L English Erasing a track from the program NTROL PURE G CO NO JO ER VOLUME TRACK 2 Press either CD 1, CD 2, CD 3, or CDR to select the desired memory.
ABOUT RECORDING English Basic information Direct Line Recording (DLR) The CD recorder deck offers you 3 main functions: – Recording from the internal CD changer and tuner or from a selected external source – Finalizing your CDR(W) discs and unfinalizing your CDRW discs – Erasing a CDRW disc The CD recorder is equipped with the high-performance Direct Line Recording technique. It ensures a perfect recording of the source material, meaning a true “bit for bit” recording.
Recording modes For internal recordings you can record from the internal CD changer or tuner. You can choose from the following recording modes: – High speed recording and automatic finalizing: Fast and easy! Record and finalize your CDR(W) in one quick step while the sound is muted. You can record the current CD or a program from the CD changer. – High speed recording: Record your CDR(W) fast while the sound is muted. You can record an entire CD, a track, a program or a track edit from the CD changer.
INTERNAL RECORDING English ANAL DIGITAL / OG AUX STANDBY ON TUNER iR SEN CD 1 SOR CD 2 CD 3 RDS FW- R7 CD /TA NEWS E CK /TIM T CLO CD TEX EM MIN I HIFI SYST RECO RDAB LE Note: When the CDR(W) already contains a recording, ALC will also become active and ALC will be shown.
ANAL DIGITAL / English INTERNAL RECORDING OG AUX STANDBY ON TUNER iR SEN CD 1 SOR CD 2 CD 3 RDS FW- R7 CD /TA NEWS E CK /TIM T CLO CD TEX EM MIN I HIFI SYST RECO RDAB LE DISPLAY CD -TEXT EDITING OPEN/C LOSE DER CD RECOR CDR ST MA RECORD ER VOLUME NTROL E S CD CD DN S ES COMPILE CD SEARCH ND U LO PLAY/ PAUSE SEARCH DSC PURE Y NO J CO OG STOP REC TYP INC RED IBLE E UR RO U RE C PR OG ERASE EDIT LE VE E FINALIZ TEXT L TRACK Manual recording Manual re
EXTERNAL RECORDING English ANAL DIGITAL / OG AUX STANDBY ON TUNER iR SEN CD 1 SOR 6 Start playback on the selected source. yThe CD recorder starts to record simultaneously and RECORDING IN PROGRESS is shown. The remaining recording time on the CDR(W) is displayed.
EXTERNAL RECORDING Automatic track increment Manual recording from an external source 1 Make sure the CDR(W) is absolutely free of scratches and dust particles. In recording mode tracks will be incremented automatically such that the track numbers are positioned on the same position as the original. 2 Press repeatedly DIGITAL / ANALOG AUX to select the input for the external source you want to record from. yAUX Digital is displayed if the digital input is selected.
(UN)FINALIZING, ERASING ST MA NTROL E S CD CD COMPILE CD SEARCH U LO PLAY/ PAUSE SEARCH STOP INC RED IBLE PE REC TY C PR OG ERASE RE EDIT LE VE FINALIZE TEXT L TRACK Finalizing CDR(W) discs Finalizing a CDR(W) disc is a simple procedure, necessary to: – play a recorded CDR on a standard CD player, – play a recorded CDRW on a CDRW compatible CD player and CD recorder, – avoid further unwanted recordings on a disc, or – avoid erasure of tracks on a CDRW.
ST MA RECORD NTROL G CO E S CD CD PURE Y NO JO ER VOLUME DN S ES COMPILE CD SEARCH SEARCH U LO PLAY/ PAUSE Note: When erasing more tracks, the tracks to be erased must be selected in sequence, starting from the last recorded track. Example: The CDRW has 5 tracks recorded on it. Now, you can erase tracks 5 and 4.
FEATURES ST MA RECORD E S CD CD NO Y PURE NTROL COMPILE CD SEARCH S ES G CO DN English JO ER VOLUME U LO PLAY/ PAUSE SEARCH STOP INC RED IBLE PE REC TY RE C PR OG ERASE EDIT LE VE FINALIZE TEXT L TRACK EDIT TEXT (on CD recorder only) Storing text during stop mode After you have recorded your CDR(W) you can enter a text e.g. names to discs and tracks. The text will be displayed during playback. You can enter up to 60 characters per text field.
Erasing text 1 Press EDIT TEXT to enter the text edit menu. yCD TEXT EDIT is blinking, Text Edit is displayed. 2 Rotate JOG CONTROL to select the text erase menu. yText Erase is displayed. 3 Press YES to confirm. 4 Rotate JOG CONTROL to select one of the following: yAll Text: All text of the selected disc is chosen to be erased in one step. yAlbum Artist: CD artist’s name is chosen to be erased. yAlbum Title: CD title is chosen to be erased.
TUNER English 2 Keep PROG (PROGRAM on the remote control) pressed for more than 2 seconds. y Autoprogram is displayed, PROG and the current preset number in the music calendar start blinking. y All available radio stations for the selected waveband are stored automatically. PROG goes off, the preset number, the waveband and the frequency of the last preset station are displayed briefly.
RDS EON NEW RDS ABLE MINI HIFI SYSTEM CD TE XT S/TA CLOCK /TIMER The feature Enhanced Other Networks contains information on the RDS content of certain other RDS radio stations. When EON is active, EON is shown. Then listening to a CD(RW) will not only be interrupted temporarily by the news or traffic announcement of the selected station, but of other RDS stations as well.
CLOCK/TIMER English 4 Press YES to confirm the selection. y The day of the week digit blinks. OPEN/CLOSE CD CHANGE LE • 3 CD CHANGER CD REWRITABLE COMPATIB 5 Rotate JOG CONTROL to set the day. DIGITAL / ANALOG 6 Use ! SEARCH or ⁄ SEARCH on the set to move from day of the week to hour. AUX STANDBY ON TUNER SOR iR SEN CD 1 CD 2 CD 3 NEW S/TA RDS FW- R7 CD RECO RDAB SYSTE M LE MINI HIFI CD TEX CK/ T CLO DISPLAY CD -TEXT 8 Repeat steps 6 and 7 to set the minutes.
You can select different timer functions which will be activated at a chosen time. Make sure the clock is set before using one of these features. Alarm timer Alarm timer setting The set can be used as an alarm clock, whereby the tuner, CD recorder or CD changer starts playback automatically at a preset time. 5 Use ! SEARCH or ⁄ SEARCH on the set to move from hour to minutes of start of recording. 6 Rotate JOG CONTROL to set the minutes of start of recording.
TECHNICAL DATA Subject to modification without notice. English General AC Power......................................................220–240 V / 50 Hz Power consumption Active...........................................................................81 W Standby.....................................................................< 22 W Economy power save mode .......................................< 2 W Dimensions, w × h × d ............................265 × 310 × 400 mm Weight (without speakers) ........
WARNING Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee. Do not open the set as there is a risk of electric shock. If a fault occurs, first check the points listed, before taking the set for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre. LASER SAFETY This unit employs a laser.
English Meet Philips at the Internet http://www. philips.com Français Español Deutsch W CLASS 1 LASER PRODUCT 3103 306 1690.
