User Guide

Recording from the tuner
1 Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2 Press TUNER repeatedly to select the FM tuner.Then select
the desired radio station (see “Tuning to radio stations”).
3 Press RECORD on the set to enter the recording menu.
➜ REC FM TUNER is displayed.
4 Press YES to confirm.
➜ PREPARING and RECORD? are displayed.
5 Press YES to start recording.
➜ The arrow lights, RECORDING IN SESSION is shown,
recording starts and the actual recording time left starts
to count down.
6 Press Ç to stop recording.
Further recording possibilities
High speed recording of an entire disc, a track or a
program
1 Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2 Press either CD1, CD2 or CD3 to select the disc you wish
to record from.
3 Press RECORD on the set to enter the recording menu.
4 Rotate í JOG CONTROL ë to select one of the
following high speed recording modes:
If a disc from the CD changer is selected:
➜ REC CD1 (or 2,3) FAST?: for high speed recording of
CD1 (or 2, 3)
Continue with step 5.
➜ REC TR FAST?: for high speed recording of a track
Press YES to confirm.
Rotate í JOG CONTROL ë to select the desired track.
➜ REC TR and the track number is displayed.
Continue with step 6.
If a program is available:
➜ PROG FAST?: for high speed recording of the program
5 Press YES to confirm your selection.
➜ The arrow starts blinking.The remaining recording time of
the CDR(W), the total recording time of the CDR(W) and
RECORD? are displayed.
Note: If the CDR(W) already contains a recording, ALC will also
become active.
6 Press YES to start high speed recording.
➜ The arrow lights, RECORDING IN SESSION is shown, high
speed recording starts and the actual recording time left
starts to count down.
00
To stop recording press Ç on the set.
Normal recording while listening to an entire disc,
a track or a program
1 Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2 Press either CD1, CD2 or CD3 to select the disc you wish
to record from.
3 Press RECORD on the set to enter the recording menu.
4 Rotate í JOG CONTROL ë to select one of the
following normal recording modes:
If CD changer is selected:
➜ RECORD CD1 (or 2,3)?: for listening to CD1 (or 2, 3)
during normal recording
➜ REC TRACK?: for listening to the track during normal
recording
Press YES to confirm.
Rotate í JOG CONTROL ë to select the desired track.
➜ REC TR and the track number are displayed.
Press YES to start normal recording.
If a program is available:
➜ REC PROG?: for listening to the program during normal
recording
5 Press YES to confirm your selection.
➜ The arrow starts blinking.The remaining recording time of
the CDR(W), the total recording time of the CDR(W)
and RECORD? are displayed.
6 Press YES to start normal recording.
➜ The arrow lights, RECORDING IN SESSION is shown,
normal recording starts and the actual recording time left
starts to count down.
00
To stop recording press Ç on the set.
Do not forget to finalize! Finalizing a CDR(W) disc is
a simple procedure, necessary to:
– play a recorded CDR on a standard CD player, or
– play a recorded CDRW on a CDRW compatible
CD player and CD recorder.
Internal recording
20
English
DISPLA
Y
C
LO
C
K•TIM
E
R
CD RECORDER
C
D
R
O
P
E
N
•C
LO
S
E
M
A
S
T
E
R
V
O
L
U
M
E
C
O
P
Y
C
D
C
O
M
PIL
E
C
D
RECORD
FINALIZE
ERASE
JOG
CONTROL
CD
O
N
•O
FF
L
EV
EL
MIC/
LEVEL
SOURCE
A
U
X
TUNER
CDR
CD1
CD2
CD3
MIC