FW- P88 Mini Hi-Fi System with 3 CD changer pg 01-31/P88/22-Eng 1 3/6/00, 1:26 PM 3139 116 19611
English Important notes for users in the U.K. Italia Français Español Deutsch Nederlands Italiano Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type. 3 Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
Italiano .................................146 Svenska ...............................174 Dansk ...................................202 Suomi ...................................230 Português ............................258 CLASS 1 LASER PRODUCT ∂ÏÏËÓÈο ............................ 286 Français Español Italiano Nederlands Deutsch Nederlands ..........................118 Svenska Deutsch ..................................88 Dansk Español ..................................60 Suomi Français ............
CONTENTS English General Information ................................................................................... 5 Safety Information ...................................................................................... 5 Preparation ............................................................................................. 6 - 7 Dolby Pro Logic ...................................................................................... 8 - 9 Controls ..................................................
General Information SAFETY INFORMATION Energy Star • The type plate (which contains the serial number) is located at the rear of the system. • Recording is permissible if copyright or other rights of third parties are not infringed. • This product complies with the radio interference requirements of the European Community. As an ENERGY STARR Partner; Philips has determined that this product meets the ENERGY STARR guidelines for energy efficiency.
PREPARATION English A AM Loop Antenna Connection Rear Connections Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception. STANDBY ON SU surr. L surr. R BW O OFER LEVEL CONTR OL MIN MAX CUT OFF FREQUENCY HIGH POWER SUBWOOFER 60Hz 150Hz H AUDIO OUT G I B FM Wire Antenna Connection Connect the supplied FM wire antenna to the FM ANTENNA 75 Ω terminal.
CAUTION: – For optimal sound performance, it is recommended to use the supplied speakers. – Do not connect more than one speaker to any one pair of +/- speaker terminal. – Do not connect speakers with impedance lower than the speakers supplied. Please refer to SPECIFICATION section of this manual. D Rear Surround Speakers’ Connection Connect the black (non-marked) wires to the black REAR SURROUND terminals and the colored (marked) wires to the grey REAR SURROUND terminals.
DOLBY PRO LOGIC English Dolby Pro Logic This state of the art Dolby Pro Logic mini system enables you to experience and enjoy a Home Cinema sound ambience. The Pro Logic system allows more accurate definition of the individual sound sources. It produces greater sound separation between channels and provides pinpoint sound localization. Pro Logic provides four sound outputs: Left, Center, Right and Surround (Rear). Front sounds are produced from the pair of Left and Right speakers and a Center speaker.
When you have completed the Dolby Pro Logic setup, you are ready to enjoy Home Cinema sound. • Press DPL (PRO LOGIC) repeatedly to select and cycle through the various sound modes. DPL TEST T PRO LOGIC Dolby Surround ™ Dolby Center Phantom ™ Dolby 3 Stereo ™ Stereo ™ Dolby Surround … ™ The Dolby Pro Logic display panel will light up with the selection. Dolby Surround Dolby 3 Stereo This setting is for a full Dolby Surround Pro Logic mode.
CONTROLS English OPEN•CLOSE DISC CHANGE # DISC 1 DISC 2 $ DISC 3 % @ TV/AV 3CD CHANGER ! ^ 0 MINI HIFI SYSTEM STANDBY ON DOLBY B NR LEFT 1 SURR POWER SAVE RIGHT SURR PRO LOGIC 2 NEWS/TA RDS IR SENSOR C VE /TR C PERSO NA L DS 5 BASS EB CD 1•2•3 BAND CD TUNER SEARCH•TUNING TAPE 1•2 CDR/DVD PLAY PAUSE CD TEXT AUX TAPE STOP•CLEAR ▲ 3 4 CENTER PREV PRESET ▲ SIDE NEXT VOLUME CLOCK/ TIMER DIM A.
Controls on the system and remote control – 1 STANDBY ON – to switch the system on or to standby mode. – to use for EASY SET. 2 POWER SAVE – to switch the system to energy saving mode. 3 IR SENSOR – sensor for the infrared remote control. 4 PROG (PROGRAM) for CD ............ to program CD tracks. for TUNER ..... to program preset radio stations. for CLOCK ..... to select 12 or 24 hour in clock setting mode (on the system only).
CONTROLS English ™ – £ – ≤ – ∞ – – § – – í PREV / SIDE / NEXT ë (PRESET 4 3 ) for CD ............ to skip to the beginning of the current, previous, or next track. for TUNER ..... to select a preset radio station in memory. for TAPE ........ to select tape side (back or front) in tape deck 2 only. for CLOCK ..... to set the minute (on the system only). RECORD to start recording on tape deck 2. VOLUME to increase or decrease the volume. DUB (HSD) (HIGH SPEED DUBBING) to dub a tape in normal or fast speed.
MINI HIFI SYSTEM STANDBY ON DOLBY B NR LEFT SURR POWER SAVE CENTER RIGHT SURR PRO LOGIC NEWS/TA RDS To start the demonstration mode • Press and hold Ç(on the system only) for 5 seconds when the system is in standby mode. ™ The demonstration will begin.
OPERATING THE SYSTEM English Switching the system ON Selecting the Source • Press CD, TUNER, TAPE or AUX. • Press the respective source selection button: CD, TUNER, TAPE or AUX. ™ The display indicates the selected source. You can also switch on the system by pressing any one of the CD DIRECT PLAY buttons. Switching the system to standby mode • Press STANDBY ON or B on the remote control. ™ The system will switch to standby mode.
Personal Setting You can adjust the personal setting to your desired level with the JOG control. 1 Press and hold PERSONAL for about 5 seconds to switch on the personal setting mode. ™ "SELECT PRESET NUMBER" will be displayed. 2 Adjust the JOG to select the desired preset number for personal setting and press á to confirm the selection. ™ "ADAPT LOW FREQ LEVEL" will be displayed. 3 Adjust the JOG to select the desired Spectrum Analyzer band level for low frequency.
OPERATING THE SYSTEM English wOOx There are three wOOx settings to enhance the bass response. 1 Press wOOx PLUS (or wOOx on the remote control) to select between normal or enhanced wOOx effect. • When normal wOOx sound effect is selected; ™ The WOOX display is switched off. ™ "WOOX NORM" will be displayed. • When enhanced wOOx sound effect is selected; ™ The WOOX appears on the display. 2 Adjust wOOx LEVEL to select the desired levels of wOOx. ™ The WOOX display lights up.
OPEN•CLOSE DISC CHANGE DISC 1 DISC 2 DISC 3 3CD CHANGER MINI HIFI SYSTEM STANDBY ON DOLBY B NR LEFT SURR POWER SAVE CENTER RIGHT SURR PRO LOGIC NEWS/TA RDS IR SENSOR C1CD •2•3 TAPE 1•2 TAPE PERSO NA L DS C VE C /TR EB SEARCH•TUNING STOP•CLEAR CDR/DVD CD TEXT CDR AUX PRESET ▲ PREV SIDE NEXT ▲ BAND BAND TUNER CD 1•2•3 BASS PLAY PAUSE VOLUME LE PROG CLOCK/ TIMER DIM A.
CD English Playing a CD Disc Change 1 Press PLAYÉÅto start playback. ™ The disc tray, track number and elapsed playing time of the current track appear on the display. • To interrupt playback, press PAUSEÉÅ. ™ The playing time flashes. • To resume playback, press PLAYÉÅ again. 2 To stop playback, press Ç. You can change the outer two discs while the third inner disc is stopped or is playing. Notes: – All the available discs will play once, then stop.
– If the system is reading the disc, programming is not possible, “READING” will be displayed and followed by "DISC X" . "X" is the current read disc number. – During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. Reviewing the program Reviewing of the program is possible only when playback is stopped. 1 Press í or ë repeatedly to review the programmed tracks. 2 Press Ç once to exit review mode.
TUNER English MINI HIFI SYSTEM STANDBY ON DOLBY B NR LEFT SURR POWER SAVE CENTER RIGHT SURR PRO LOGIC NEWS/TA RDS IR SENSOR C 1CD •2•3 PERSO NA L DS C VE C BASS /TR EB BAND TAPE 1•2 BAND TUNER TAPE SEARCH•TUNING STOP•CLEAR CDR/DVD CD TEXT CDR AUX PRESET ▲ PREV SIDE NEXT ▲ CD 1•2•3 PLAY PAUSE VOLUME LE PROG CLOCK/ TIMER DIM A. REV DUB (HSD) RECORD TREBLE BASS PLUS wOOx TECHNOLOGY Note: – For 'EASY SET' feature, please refer to page 13.
Receiving RDS Radio Station Ç RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along with the regular FM radio signal. This additional information can contain: • STATION NAME: The radio station name is displayed. • PROGRAM TYPE: The following program types exist and can be received by your tuner: News, Affairs, Info, Sport, Educate, Drama, Culture, Science, Varied, Pop M, Rock M, M.O.R. (middle of the road music), Light M, Classics, Other M, No type.
AUX/CDR MINI HIFI SYSTEM STANDBY ON DOLBY B NR LEFT SURR POWER SAVE CENTER RIGHT SURR PRO LOGIC NEWS/TA RDS IR SENSOR CD 1•2•3 BAND C1CD •2•3 DS C VE PERSO NA L English – During News bulletin or Traffic Announcement, you can press any available source or Tuner function keys to cancel NEWS/TA function and execute the relevant source mode.
MINI HIFI SYSTEM STANDBY ON DOLBY B NR LEFT SURR POWER SAVE CENTER RIGHT SURR PRO LOGIC NEWS/TA RDS IR SENSOR CD 1•2•3 PERSO NA L DS C VE C BASS /TR EB BAND TAPE 1•2 CDR/DVD BAND TUNER TAPE CDR AUX SEARCH•TUNING STOP•CLEAR PLAY PAUSE ▲ C 1CD •2•3 PREV PRESET ▲ SIDE NEXT CD TEXT Loading a tape Auto Reverse Playback (only on 1 Press on the tape deck to open the tape deck door. 2 The tape deck door opens.
TAPE English 3a(for playback on tape deck 2 only) • Press í or ë to select tape side (see Tape Side). • Press A. REV to select the different type of playback mode (see Auto Reverse Playback). 4 Press Ç to end playback. ™ "T1 or T2" with "! ! ! or @ @ @" will be displayed. Note: – When the tape has stopped playing, the system will switch to standby mode after 30 minutes if no button is pressed.
MINI HIFI SYSTEM STANDBY ON DOLBY B NR LEFT SURR POWER SAVE CENTER RIGHT SURR PRO LOGIC NEWS/TA RDS IR SENSOR CD 1•2•3 PERSO NA L DS C VE C BASS /TR EB BAND TAPE 1•2 CDR/DVD BAND TUNER TAPE AUX CDR SEARCH•TUNING STOP•CLEAR PLAY PAUSE ▲ C 1CD •2•3 PREV PRESET ▲ SIDE NEXT LE PROG CLOCK/ TIMER DIM A.
RECORDING English Dubbing tapes (from tape deck 1 to tape deck 2) 1 Press TAPE ( TAPE 1•2 ) to select tape deck 2. 2 Load the prerecorded tape into tape deck 1 with full spool to the left and a blank tape into tape deck 2 with full spool aside. 3 Press í or ë to select the recording tape side (see Tape Side under TAPE section). 4 Press DUB (HSD) once for normal speed dubbing or twice (within 2 seconds) for high speed dubbing.
TIMER MINI HIFI SYSTEM STANDBY ON DOLBY B NR LEFT SURR POWER SAVE CENTER RIGHT SURR PRO LOGIC 5 Press CLOCK/TIMER again to store the setting. ™ The clock starts. NEWS/TA RDS • To exit without storing the setting, press Ç on the system. IR SENSOR CD 1•2•3 C PERSO NA L DS C VE BASS /TR EB BAND TAPE 1•2 CDR/DVD BAND TUNER TAPE CDR AUX SEARCH•TUNING STOP•CLEAR ▲ C1CD •2•3 PREV PLAY PAUSE PRESET ▲ SIDE NEXT CD TEXT VOLUME LE PROG CLOCK/ TIMER DIM A.
TIMER SLEEP TIMER English 5 Press CLOCK/TIMER to store the start time. ™ The timer is now set. ™ The TIMER remains on the display. • At the preset time, the timer will be activated. ™ The selected source will be played. Notes: – During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. – If the source selected is TUNER, the last tuned frequency will be switched on.
Specifications AMPLIFIER Output power DPL Mode Left/Right Channel .. 2 x 160 W MPO / 2 x 80 RMS(1) Center Channel .......... 80 W MPO / 40 W RMS, 12 Ω Surround Channel ............................. 2 x 40 W MPO / .................................................... 2 x 20 W RMS, 6 Ω Stereo Mode ................ 2 x 160 W MPO / 2 x 80 RMS(1) Signal-to-noise ratio .................................... ≥ 75 dBA (IEC) Frequency response .........................
MAINTENANCE TROUBLESHOOTING English Maintenance Cleaning the Cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.
Tape Deck Operation General Recording or playback cannot be made or there is a decrease in audio level. • Dirty tape heads, capstans or pressure rollers. ™ See section on tape deck maintenance (page 30). • Magnetic build-up in the record/ playback head. ™ Use demagnetizing tape. System does not react when any button is pressed. • Electrostatic discharge. ™ Press STANDBY ON to switch the system off.
