FW- P78 Mini Hi-Fi System with 3 CD changer 1 Untitled-2 1 6/8/01, 10:12 AM 3139 116 19311
English Français Español México Es necesario que lea cuidadosamente su instructivo de manejo. PRECAUCIÓN - ADVERTENCIA No abrir, riesgo de choque eléctrico ATENCIÓN Verifique que el voltaje de alimentación sea el requerido para su aparato Para evitar el riesgo de choque eléctrico, no quite la tapa. En caso de requerir servicio, dirijase al personal calificado. Descripción: . . . . . . . . . . . . . . . . . . . . . . Modelo : . . . . . . . . . . . . . . . . . . . . . . . . . Alimentación: . . . . . . . .
English .....................................4 Français .................................30 Español ..................................56 Español Français English INDEX .................................................82 Warranty ..............................
CONTENTS English General Information ........................................................................ 5 Safety Information ........................................................................... 5 Preparation ................................................................................. 6 - 7 Dolby Pro Logic ......................................................................... 8 - 9 Controls ...................................................................................
IMPORTANT: PLEASE NOTE THAT THE VOLTAGE SELECTOR LOCATED AT THE REAR OF THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY. FOR COUNTRIES THAT OPERATE AT 110V, PLEASE ADJUST TO 110V BEFORE YOU SWITCH ON THE SYSTEM. SAFETY INFORMATION Energy Star As an ENERGY STARR Partner; Philips has determined that this product meets the ENERGY STARR guidelines for energy efficiency. Acknowledgement General Information • The type plate (which contains the serial number) is located at the rear of the system.
PREPARATION English A AM Loop Antenna Connection Rear Connections Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception. STANDBY ON SU BW O OFER LEVEL CONT RO L MIN MAX CUT OFF FREQUENCY HIGH POWER SUBWOOFER 60Hz 150Hz H AUDIO OUT G B FM Wire Antenna Connection Connect the supplied FM wire antenna to the FM ANTENNA 75 Ω terminal.
CAUTION: – For optimal sound performance, it is recommended to use the supplied speakers. – Do not connect more than one speaker to any one pair of +/- speaker terminal. – Do not connect speakers with impedance lower than the speakers supplied. Please refer to SPECIFICATION section of this manual. D Rear Surround Speakers’ Connection After all other connections have been made, connect the AC power cord to the system and to the wall outlet.
DOLBY PRO LOGIC English Dolby Pro Logic This state of the art Dolby Pro Logic mini system enables you to experience and enjoy a Home Cinema sound ambience. The Pro Logic system allows more accurate definition of the individual sound sources. It produces greater sound separation between channels and provides pinpoint sound localization. Pro Logic provides four sound outputs: Left, Center, Right and Surround (Rear). Front sounds are produced from the pair of Left and Right speakers and a Center speaker.
When you have completed the Dolby Pro Logic setup, you are ready to enjoy Home Cinema sound. • Press DPL (PRO LOGIC) repeatedly à to select and cycle through the various L sound modes. Ç á DPL BALANCE R Dolby Surround ™ Center Phantom ™ Dolby 3 Stereo ™ Stereo ™ Dolby Surround … ™ The Dolby Pro Logic display panel will light up with the selection. Dolby Surround Dolby 3 Stereo This setting is for a full Dolby Surround Pro Logic mode.
CONTROLS English # @ DISC CHANGE ! $ OPEN•CLOSE DISC 1 DISC 2 DISC 3 3CD CHANGER % 0 C MINI HIFI SYSTEM PROGRAM REPEAT TIMER REC NEWS T.A. AM MW FM LW 2 STEREO BACK FRONT HSD 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz L ^ & R PRO LOGIC 8KHz S S STANDBY ON 9 8 2 % @ CLOCK/ TIMER 7 CD1 • 2 • 3 BAND TAPE 1 • 2 CD TUNER TAPE PROG SEARCH • TUNING SIDE A•B STOP • CLEAR PLAY PAUSE CDR / VIDEO * ( AUX PRESET ▲ PREV SIDE NEXT ▲ 1 TV A.
Controls on the system and remote control 1 STANDBY ON – to switch the system on or to standby mode. – to use for EASY SET. 2 LOW POWER STANDBY LED – lights up during low power standby. 3 DIGITAL SOUND CONTROL (DSC) – to select the desired sound effect : OPTIMAL, CLASSIC, TECHNO, JAZZ, ROCK or VOCAL. 4 n – to connect headphones. 5 REC (RECORD) – to start recording on tape deck 2. 6 DUB (HIGH SPEED DUBBING [HSD]) – to dub a tape in normal or fast speed. 7 JOG – to select the desired equalizer display.
OPERATING THE SYSTEM English º BALANCE L/R – to balance the sound level of the Front Left and Right speakers. ⁄ CENTER +/– to adjust the sound level of the center speaker. ¤ REAR +/– to adjust the sound level of the surround speakers. ‹ TEST TONE – to check the sound level of the Front Left, Front Right, Center and Surround speakers. › SHUFFLE – to play all the available discs and their tracks in random order. fi SLEEP TIMER – to switch the system to standby mode at a selected time.
– Even though the AC power cord is removed from and reconnected to the wall socket, the demonstration will remain off until it is switched on again. To start the demonstration mode • Press and hold Ç(on the system only) for 5 seconds when the system is in standby mode. ™ The demonstration will begin. Notes: – EASY SET will start with the FM band, if there are still presets available, the system will continue to store the MW band.
OPERATING THE SYSTEM English Sound Control VOLUME ADJUSTMENT Adjust VOLUME to increase or decrease the sound level. For Personal Listening Connect the headphones plug to the n socket at the front of the system. The speakers will be muted. DIGITAL SOUND CONTROL (DSC) The DSC feature enables you to adjust the system to suit your type of music. • Press DIGITAL SOUND CONTROL (DSC) to select OPTIMAL, CLASSIC, TECHNO, JAZZ, ROCK or VOCAL. ™ The selected digital sound is encircled.
DISC CHANGE OPEN•CLOSE DISC 1 DISC 2 DISC 3 Discs for playback CD Direct Play This system can play all digital audio CD, finalized digital audio CD-Recordable and finalized digital audio CD-Rewritable format discs. • You can play a CD directly by pressing the DISC 1, DISC 2 or DISC 3 button. The CD player will stop at the end of playback of the selected disc. ™ A lit button indicates that a disc is loaded in the disc tray. C MINI HIFI SYSTEM PROGRAM SHUFFLE REPEAT TIMER REC NEWS T.A.
CD English Disc Change You can change the outer two discs while the third inner disc is stopped or is playing. 1 Press DISC CHANGE. ™ The CD carousel tray slides out. 2 Replace the discs in the left and right disc trays. • If you wish to change the inner disc during playback, press DISC CHANGE again. ™ "DISC CHANGE" will be displayed. ™ The CD will stop playing. ™ The CD carousel tray will close to retrieve the inner CD and then open again with the inner CD accessible.
Notes: – If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM display also will disappear temporarily from the display. It will reappear when playback of the selected disc ends. – REPEAT DISC mode is not available when program playback begins. Erasing the program (when playback is stopped) • Press Ç. ™ "PROGRAM CLEARED" will be displayed.
TUNER English C MINI HIFI SYSTEM PROGRAM SHUFFLE REPEAT TIMER REC NEWS T.A. AM MW FM LW STEREO BACK FRONT HSD 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz L R PRO LOGIC 8KHz S S STANDBY ON CD1 • 2 • 3 BAND TAPE 1 • 2 CD TUNER TAPE PROG SEARCH • TUNING SIDE A•B STOP • CLEAR PLAY PAUSE CDR / VIDEO AUX PRESET ▲ PREV SIDE NEXT ▲ CLOCK/ TIMER A.REV DU (HS B D) REC SOUND NAVIGATION DIGITAL SOUND CONTROL Note: – For 'EASY SET' feature, please refer to page 13.
TAPE English TUNER Changing the MW tuning grid For MW band To change from 9 kHz to 10 kHz or vice versa C MINI HIFI SYSTEM PROGRAM SHUFFLE REPEAT TIMER REC NEWS T.A.
TAPE English Tape Side (only on tape deck 2) Tape Playback Rewind/Fast Forward • Press í or ë to select the tape side for playback or recording. ™ The BACK or FRONT appear on the display, depending on the tape side selected. ™ "T2 <<<" or "T2 >>>" will be displayed. ™ When recording, the BACK or FRONT display will be flashing. 1 Press TAPE ( TAPE 1•2 ) to select TAPE mode. ™ "TAPE 1" or "TAPE 2" will be displayed, and followed by "T1 or T2" with "<<< or >>>".
KARAOKE English AUX/CDR C MINI HIFI SYSTEM PROGRAM SHUFFLE REPEAT TIMER REC NEWS T.A. AM MW FM LW STEREO BACK FRONT HSD 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz L R PRO LOGIC 8KHz S S STANDBY ON MIC LEVEL CD1 • 2 • 3 BAND TAPE 1 • 2 CD TUNER TAPE PROG SEARCH • TUNING HS REC SIDE A•B STOP • CLEAR PLAY PAUSE MIC CDR / VIDEO AUX PRESET ▲ PREV SIDE NEXT ▲ CLOCK/ TIMER A.
RECORDING English SWITCH OFF DOLBY PRO LOGIC WHEN RECORDING C MINI HIFI SYSTEM PROGRAM REPEAT TIMER REC NEWS T.A. AM MW FM LW STEREO BACK FRONT HSD 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz L R PRO LOGIC 8KHz S S STANDBY ON PROG CD1 • 2 • 3 BAND TAPE 1 • 2 CD TUNER TAPE SIDE A•B SEARCH • TUNING STOP• CLEAR PLAY PAUSE CDR / VIDEO AUX PRESET ▲ PREV SIDE NEXT ▲ CLOCK/ TIMER A.
4 Press DUB (HSD) once for normal speed dubbing or twice (within 2 seconds) for high speed dubbing. ™ "NORMAL" (normal speed) or "FAST" (high speed) will be displayed, followed by "DUB" with "< or >" scrolling left or right depending on the tape side selected. ™ The HSD appears on the display during high speed dubbing. • Dubbing will start immediately. ™ The REC starts flashing. 5 Press Ç to stop dubbing. Notes: – Only å mode is available during dubbing.
CLOCK TIMER English 5 Press CLOCK/TIMER again to store the setting. ™ The clock starts. C MINI HIFI SYSTEM PROGRAM SHUFFLE REPEAT TIMER REC NEWS T.A. AM MW FM LW STEREO BACK FRONT HSD 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz L R PRO LOGIC 8KHz S S STANDBY ON • To exit without storing the setting, press Ç on the system CD1 • 2 • 3 BAND TAPE 1 • 2 CD TUNER TAPE PROG SIDE A•B STOP • CLEAR PLAY PAUSE SEARCH • TUNING CDR / VIDEO AUX PRESET ▲ PREV SIDE NEXT ▲ CLOCK/ TIMER A.
SLEEP TIMER 5 Press CLOCK/TIMER to store the start time. ™ The timer is now set. ™ The TIMER remains on the display. • At the preset time, the timer will be activated. ™ The selected source will be played. Notes: – During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically. – If the source selected is TUNER, the last tuned frequency will be switched on.
SPECIFICATIONS English Specifications AMPLIFIER Output power .............................................. 2200 W PMPO DPL Mode Left/Right Channel ........................... 2 x 75 W RMS(1) Center Channel ............................... 40 W RMS, 12 Ω Surround Channel ....................... 2 x 20 W RMS, 6 Ω Stereo mode .................. 2 x 75 W, 40 W, 2 x 20 W RMS Signal-to-noise ratio .................................... ≥ 75 dBA (IEC) Frequency response .........................
TROUBLESHOOTING Maintenance Cleaning the Cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners, or antistatic spray intended for analog records.
TROUBLESHOOTING English Tape Deck Operation General Recording or playback cannot be made or there is a decrease in audio level. • Dirty tape heads, capstans or pressure rollers. ™ See section on tape deck maintenance (page 27). • Magnetic build-up in the record/ playback head. ™ Use demagnetizing tape. System does not react when any button is pressed. • Electrostatic discharge. ™ Press STANDBY ON to switch the system off.
English 29 Untitled-2 29 6/8/01, 10:13 AM 3139 116 19782
