003.
1003.5 en 04-03-2003 09:13 Pagina 1 Contents Installation Your remote control 2 Preparation 3-4 To use the menus and the menu system 4 Select the menu language 5 Select the country 5 Store TV channels Automatic installation 6 Manual installation 6 Give name 6 Reshuffle the programme list 6 Select Favourite TV channels 6 Select TV setup 7-9 English Remark : The featuring dealt with in this instruction manual does not necessarily match with your type of TV.
1003.5 en 04-03-2003 09:13 Pagina 2 Installation Your remote control w Peripherals p. 27 Source selection of EXT1, EXT2, EXT3, EXT4, EXT5, FRONT,VGA or TV channels Mode keys p. 10 TV,VCR, DVD, SAT,TAPE, CD, TUNER or CDR selection w B b Dual screen/PIP on/off p. 18 (FTR 9964 only) S Freeze format on/off p. 10 (FTR 9964 only) Ì Cinema Link See separate instruction manual æ Teletext Guide on/off p. 20 OK Activate your choice p. 10 V ¬ P Volume Up/Down p. 10 Sound mute p.
1003.5 en 04-03-2003 09:13 Pagina 3 Preparation & Place the receiver box wherever you want, but make sure that air can circulate freely through the ventilation slots. Do not install the receiver box in a confined space such as a book case or a similar unit. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.
1003.5 en 04-03-2003 09:13 Pagina 4 To use the menus and the menu system w B TV VCR TAPE CD b DVD TUNER S MOVIE SPORT CHILD Attention: point the remote control to the indicator of the monitor. SAT & CDR Ì NEWS OTHER æ b OK MENU switch main menu on/off Ï V ¬ Note: The Main menu contains the item Exit to dismiss the menu, only when you switch on your TV for the first time, or when the Main menu is summoned with the MENU key in front of the TV receiver.
1003.5 en 04-03-2003 09:13 Pagina 5 Select the menu language & Press the MENU Ï key on the remote control. w When you switch on your TV for the first time and no channels are stored so far, the menu Language automatically appears on the screen. This menu also has an additional item Exit with which the menu can be dismissed. The explanation appears in different languages, one at a time. Choose your preferred language and press the OK key on the remote control. Proceed with the Install menu.
1003.5 en 04-03-2003 09:13 Pagina 6 Manual installation Searching for and storing TV channels is done channel by channel.You must go through every step of the Manual Installation menu. Manual installation Install & Select Manual installation in the Install menu. é Press the cursor down. Selection mode System Programme Search Fine tune Store Follow the instructions on screen.
1003.5 en 04-03-2003 09:13 Pagina 7 Select TV setup General The Setup menu allows you to adjust initial settings, i.e. those which are not related to the installation of the TV channels. The Setup menu contains items that control the settings of the TV’s functions, features, services and peripherals you may have connected. Setup Menu background Smart surf (Dual screen format) (Multipip format) (Freeze format) Factory settings OSD Programme title Teletext level 2.
1003.5 en 04-03-2003 09:13 Pagina 8 Factory settings This function allows you to reset most of the picture and sound settings to their predefined factory values. & é & é Select OSD with the cursor down. Press the cursor right to select Normal or Minimum. Normal to activate extended display of TV channel and programme information on screen. Minimum to activate the display of reduced channel information. See Use of the Remote Control, p. 10, i On screen information.
03.5 en 04-03-2003 09:13 Pagina 9 Teletext level 2.5 Some broadcasters offer the opportunity to see more colours, other background colours and nicer pictures in the teletext pages. General Setup & é Teletext level 2.5 On / Off “ Select Teletext level 2.5 with the cursor down. Press the cursor right to select Teletext level 2.5 On to take advantage of this feature. Press the cursor right again to select Teletext level 2.5 Off if you like the more neutral teletext layout.
1003.5 en 04-03-2003 09:13 Pagina 10 Operation Use of the remote control B w Standby The set is switched off and the red indicator lights up. To switch the TV on again, press - P + or the digit keys. If your EasyLink video recorder has the system standby function and you press the standby key for 3 seconds, both the TV and video recorder are switched to standby.
1003.5 en 04-03-2003 09:13 Q Surround mode Pagina 11 on/off • In MONO sound mode, this feature, when switched on, enables you to hear a special effect of sound. • In STEREO sound mode,when Surround mode is switched on, it seems as though the loudspeakers are spread further apart from one another. w B TV VCR TAPE CD DVD TUNER S MOVIE SPORT CHILD ® Instant record If your video recorder has the EasyLink function, the INSTANT ® key for record can be operated in the TV mode.
1003.5 en 04-03-2003 09:13 Pagina 12 h Active Control Active Control is a pro-active and automatic system.The TV continuously measures and corrects all incoming signals in order to provide the best picture possible. According to the monitor connected (with or without an Ambient Light Sensor which measures the light conditions of the room), the Active Control functionality may differ.
1003.5 en 04-03-2003 09:13 Pagina 13 w TV menu B TV VCR TAPE CD b DVD TUNER S MOVIE SPORT CHILD SAT CDR Press the MENU Ï key on the remote control to summon the main menu. Ì NEWS OTHER æ b OK MENU Ï V ¬ P switch main menu on/off Note: When the main menu is accessed from the keypad in front of the TV receiver box, it has an additional Exit item, which lets you dismiss the menu. Warning: The main menu is completely different when a VGA source is displayed. See p. 27.
1003.5 en 04-03-2003 09:13 Pagina 14 Picture TV Contrast Brightness Colour Sharpness Tint Dig. natural motion Dynamic Contrast DNR Colour enhancement (Hue) Smart picture Picture format Colour enhancement When activated, this feature automatically controls green enhancement and blue stretch. It makes the colours more vivid. Select On or Off in order to activate/de-activate Colour Enhancement with the cursor right.
1003.5 en 04-03-2003 09:13 Pagina 15 Headphone volume This control allows you to adjust the volume level of the headphone. Sound TV Volume Treble Bass Balance Headphone volume (Surround mode) (Dual I-II) (Mono/Stereo) (Nicam/Analogue) (Night mode) (Audio only) Smart sound Surround mode Only selectable with a Cinema Link configuration. See separate booklet supplied. Dependent on the Cinema Link configuration and the sound signal broadcasted, select one of the Surround modes.
1003.5 en 04-03-2003 09:13 Pagina 16 Features menu Select the menu items in the Features menu with the cursor up/down and adjust the settings with the cursor left/right. Programme list This list will display all the stored TV channels. Select a programme number with the cursor up/down. Press the OK key to switch over to the selected TV channel or external.
1003.5 en 04-03-2003 09:13 Pagina 17 On timer With the On timer function you can make your TV automatically switch to a specific programme number from standby or switch over to a different programme number at a specific time. Note:Your TV receiver box and your monitor should not be powered off with the B power key. Features TV Programme Sleeptimer Subtitle Child lock On timer On timer Off On VCR1 BBC1 BBC2 CNN TVE π..... Off On Sunday Monday .......
1003.5 en 04-03-2003 09:13 Pagina 18 Dual screen/PIP w Press the b key to turn on or off Dual screen or PIP, according to the format selection made in the Dual screen format list in the General menu. See Setup, General, p. 7. B b TV VCR TAPE CD DVD TUNER b S ® Ò SAT CDR Audio from the main screen (the left screen in Dual screen and the full size screen in PIP) plays to the speakers; Audio from the right screen or from the PIP plays to the headphones.
1003.5 en 04-03-2003 09:13 Pagina 19 Multipip (FTR 9964 only) In the Setup menu, General, p. 8 you selected which Multipip format you prefer to see. & PIP 3 Press the fi key on the remote control to toggle the selected Multipip format On or Off. The main screen displays the channel or source tuned before Multipip was activated and the highlight is on the main screen. é Press the cursor left/right, up/down to highlight a PIP screen.
1003.5 en 04-03-2003 09:13 Pagina 20 Teletext Guide TV channels which broadcast teletext also transmit a page with the programme guide of the day. If the displayed teletext programme guide page satisfies the Video Programming via Teletext (VPT) requirements, it will be possible to record, remind, watch or lock programmes. w B TV VCR TAPE CD DVD SAT TUNER CDR S æ OK key to activate MOVIE SPORT CHILD & Press the æ key.
1003.5 en 04-03-2003 09:13 Pagina 21 Teletext w B b TV VCR DVD SAT TAPE CD TUNER CDR b S colour keys to select Ì b æ b OK MENU Ï V ¬ Most TV channels broadcast information via teletext. Depending on the TV channel, teletext is transmitted in different systems. The colours used in the bottom line of the teletext page correspond with the colour keys of your remote control. Switch Teletext on and off cursor to select pages Press b to switch the teletext on or off.
1003.5 en 04-03-2003 09:13 Pagina 22 Select subpages When a selected teletext page consists of different subpages, one of the subpages appears on the screen. Press the cursor right to highlight the subpagenumber. Press the cursor up/down to select the next or previous subpage or enter the subpagenumber with the digit keys.
1003.5 en puck 04-03-2003 Menu 100 1 BBC 09:13 Pagina 23 Mon 05 Feb Green 16.35.22 CEEFAX Reveal CycleRECORD subpages LIONS ANOTHER WIN 430 Timed page Index 100 News Language BBC Info 110 Headlines Children 120 Weather Cookery 150 Sports Education 200 Radio Lottery 230 Travel Finance 240 Subtitling Music 280 TV Listings Red Language If the displayed characters on screen do not correspond with the characters used by the teletext broadcaster, you can change the language group here.
1003.5 en 04-03-2003 09:13 Pagina 24 Connect Peripheral Equipment There is a wide range of audio and video equipment that can be connected to your receiver.The following connection diagrams show you how to connect them to the back or the front side of the receiver. Note: in case of the monitor in a stand alone situation without the receiver box connected, see the instructions with the monitor.
1003.5 en 04-03-2003 09:13 Pagina 25 Video recorder and other peripherals & ≈ CABLE 1 EXTERNAL é Look for the test signal of your peripheral in the same way as you do for a video recorder. 1 2 4 When a video recorder is connected to EXTERNAL 1 you can only record a programme from your TV tuner. Only when a video recorder is connected to EXTERNAL 2 it is possible to record a programme from your TV as well as from other connected equipment. See Record with your video recorder, p. 30.
1003.5 en 04-03-2003 09:13 Pagina 26 Headphone & Insert the plug into the headphone socket L behind the door at the front side of the receiver. Press the centre of the door to open. é Press ¬ to switch off the internal loudspeakers of the TV. The headphone impedance must be between 8 and 2000 Ohm. The headphone socket has a 3.5 mm jack. L In the SOUND menu select Headphone volume to adjust the headphone volume and balance and to select the audio source for your headphone sound. See p. 15.
1003.5 en 04-03-2003 09:13 Pagina 27 To select connected equipment Equipment connected with an aerial cable only : Select the programme number under which you have stored the test signal with the digit keys. w Equipment connected to a euroconnector, to the VGA MONITOR IN connector or to the front side of the receiver box Press the w key repeatedly to select EXT1, EXT2, EXT3, EXT4, EXT5, FRONT or VGA, according to where you connected your equipment at the back or the front side of your receiver.
1003.5 en 04-03-2003 09:13 Pagina 28 Video recorder with EasyLink The video recorder can be operated via the VCR menu on screen. & é Press the MENU Ï key on the remote control. Select the VCR menu with the cursor up/down.
1003.5 en 04-03-2003 ® Ò ‡ π † æ 09:13 Pagina 29 DVD keys Press one of the following keys after you have pressed the DVD key.
1003.5 en 04-03-2003 09:13 Pagina 30 Record with your video recorder without EasyLink To record S-VHS quality, connect an S-VHS peripheral directly to the video recorder. & é Record a TV programme Select the programme number on your video recorder. Set your video recorder to record. See the handbook for your video recorder.
1003.5 en 04-03-2003 09:13 Pagina 31 Tips Poor Picture • Have you selected the correct TV system? • Is your monitor or house aerial located too close to loudspeakers, non-earthed audio equipment or neon lights, etc.? • Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. • Check if you have entered the correct frequency. See Installation, p. 6.
1003.5 en 04-03-2003 09:13 Pagina 32 Glossary Automatic Channel Installation (ACI) Automatically installs all TV channels in the same order as offered by your cable company, provided of course that the data is transmitted. It also automatically includes programme number and programme name. With ACI, channel installation is fully automatic, simple and fast. Child Lock Feature to prevent unauthorised use of your TV.The TV can only be switched on and operated with the remote control.
2147.
2147.
(16x24) 14-03-2003 Note: The Cinema Link functionality is only available with devices of the Cinema Link (P50.3) generation ! Recommended: Do not use the AC outlet at the back of the audio receiver to power the DVD or the video recorder in a Home Cinema configuration.
2147.6 (16x24) 14-03-2003 16:14 Pagina 2 Activating CinemaLink Continue to press the Ì-key on the remote control for more than 4 seconds. & The TV or receiver box sends a play command to the Cinema Link DVD player, if present. é The DVD player will start playing and the audio receiver automatically switches to the best Cinema Link sound. “ If no DVD player is connected or if the DVD player has no disc loaded, the command can not be executed.
2147.6 (16x24) 14-03-2003 16:14 Pagina 3 Night mode (only functional with Dolby Digital sound broadcasting input) The loud parts of the sound are lowered and the soft passages are raised. You can enjoy surround sound without disturbing sleeping children or neighbours. Audio only This control enables you to blank the TV picture if the TV or monitor is used as centre speaker in the Cinema Link system and if the audio receiver is reproducing sound unrelated to a TV picture.
2147.6 (16x24) 14-03-2003 16:14 Pagina 4 Automatic installation Automatic install In the Automatic installation menu select Start to activate the automatic searching of all radio stations which can be received. The programme list is automatically filled with all the numbers and names of the radio stations transmitted. Receiver Install Start Manual installation Manual install You can also search for a known radio station by keying in the frequency.
