USB Flash Drive Register your product and get support at www.philips.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
For customers in the U.S.A. Changes or modifications made to this equipment not expressly approved by company may void the FCC authorization to operate this equipment. Operation is subject to the following two conditions: 1 this device my not cause harmful interference, and 2 this device must accept any interference received, including interference that may cause undesired operation.
Environmental information Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products.
3 Install Congratulations on your purchase and welcome to Philips! Microsoft® Windows Vista, XP, 2000, ME, MAC OS 9.0 or higher: • The device driver is installed automatically when the drive is connected to a USB port of the computer. However, with some USB 2.0 cards or boards, you may need to initiate installation manually. In this case, follow the on-screen instructions to search for a suitable driver. Refer to the operating system's Help file if you need any help.
7 8 9 10 11 Click Search for the best driver for your device.Then click the Next button. Click Specify a location.Then click the Browse button. When the dialog box appears, specify the folder where the installation program is stored. Click the OK button to close the dialog box.Then click the Next button. Click the Next button. Click the Finish button. > Installation of the driver starts. > Once the installation process is complete, a drive icon for the USB flash drive appears in the My Computer window.
2 Insert the USB flash drive’s USB connector into one of the computer’s USB ports (fig. 2). > The USB flash drive’s LED lights up.The light intensity of the LED will gradually increase and then diminish again.This will continue for as long as the drive is connected to the computer. 5 Enjoy Operating the USB flash drive • Once the USB flash drive is connected to the USB port of the computer: – a software package will automatically start up enabling you to activate various applications.
Using Windows ReadyBoost • Insert the flash drive USB connector into one of the computer’s USB ports (fig. 2). > Windows Vista now checks to see if the flash drive’s performance is fast enough to work with Windows ReadyBoost. If so, you are asked if you want to use the flash drive to speed up system performance: the Windows Vista AutoPlay dialog box will offer the option of using the device for ReadyBoost.
6 Technical specifications ENGLISH Mac OS 9.0 and higher 1 Drag the drive icon to the Trash. 2 After confirming that the the USB flash drive is in standby mode, remove the the USB flash drive from the computer’s USB port. Interface • High-Speed USB 2.0 (backwards compatible with USB 1.1) Transfer rate • Read: max. 25MB per second / Write: max. 15MB per second (Highspeed USB 2.
© 2007 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract,is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use.
