user manual

ManualsBrandsPhilips ManualsFlat Panel TelevisionFlat Panel Television BDL4210Q

Table Of Contents

www.philips.com/welcome

BDL3210Q

BDL4210Q

BDL4610Q

User Manual (English)

Summary of content (30 pages)

PAGE 1
BDL3210Q BDL4210Q BDL4610Q www.philips.
PAGE 2
BDL3210Q / BDL4210Q / BDL4610Q Safety Instructions Warnings and Precautions KNOW THESE SAFETY SYMBOLS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates high voltage is present inside. It is dangerous to make any kind of contact with any inside part of this product.
PAGE 3
BDL3210Q / BDL4210Q / BDL4610Q Regulatory Information CE Declaration of Conformity We declare under our responsibility that the product is in conformity with the following standards: • EN60950-1:2006+A11:2009 (Safety requirement of Information Technology Equipment) • EN55022:2006+A1:2007 (Radio Disturbance requirement of Information Technology Equipment) • EN55024:1998+A1:2001+A2:2003 (Immunity requirement of Information Technology Equipment) • EN61000-3-2:2006 (Limits for Harmonic Current Emission)
PAGE 4
BDL3210Q / BDL4210Q / BDL4610Q Polish Center for Testing and Certification Notice The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment that works together (computer, display, printer, and so on) should have the same power supply source. The phasing conductor of the room’s electrical installation should have a reserve short-circuit protection device in the form of a fuse with a nominal value no larger than 16 amperes (A).
PAGE 5
BDL3210Q / BDL4210Q / BDL4610Q Information for U.K. only WARNING - THIS APPLIANCE MUST BE EARTHED. (B) Important: (A) This apparatus is supplied with an approved moulded 13A plug. To change a fuse in this type of plug proceed as follows: 1. Remove fuse cover and fuse. 2. Fit new fuse which should be a BS 1362 5A,A.S.T.A. or BSI approved type. 3. Refit the fuse cover. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate 3-pin plug fitted in its place.
PAGE 6
BDL3210Q / BDL4210Q / BDL4610Q China RoHS 中国电子信息产品污染控制标识要求 (中国RoHS法规标示要求) 产品中有毒有害物质或元素的名称及含量有毒有害物质或元素部件名称铅 (Pb) 汞 (Hg) 镉 (Cd) 六价铬 (Cr 6+) 多溴联苯 (PBB) 多溴二苯醚 (PBDE) 外壳 O O O O O O 液晶面板 X X O O O O 电路板组件 X O O O O O 附件 (遥控器，电源线，连接线) X O O O O O 遥控器电池 X O O O O O O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下. X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求.
PAGE 7
BDL3210Q / BDL4210Q / BDL4610Q North Europe (Nordic Countries) Information Placering/Ventilation VARNING: FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR DU STÄLLER DIN UTRUSTNING PÅPLATS. Placering/Ventilation ADVARSEL: SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT ER NEMT TILGÆNGELIGE. Paikka/Ilmankierto VAROITUS: SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI IRROTTAA PISTORASIASTA.
PAGE 8
BDL3210Q / BDL4210Q / BDL4610Q Table Of Contents 1. 2. Unpacking and Installation...................................... 1 1.1. Unpacking......................................................................1 1.2. Package Contents......................................................1 1.3. Installation Notes.......................................................1 1.4. Installing and Removing Table Stands (optional)........................................................................2 1.5.
PAGE 9
BDL3210Q / BDL4210Q / BDL4610Q 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately. • Due to the size and weight of this display it is recommended for two people to move it. • After opening the carton, ensure that the contents are complete and in good condition. 1.2. Package Contents Please verify that you received the following items with your package content: 1.
PAGE 10
BDL3210Q / BDL4210Q / BDL4610Q 1.4. Installing and Removing Table Stands (optional) To install table stands: 1. Ensure your display is powered off. 2. Spread a protective sheet on a flat surface. 3. Grab and face-down the display and place on the protective sheet.. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display. To remove table stands: 1. Power off the display. 2.
PAGE 11
BDL3210Q / BDL4210Q / BDL4610Q 1.5. Mounting on a Wall To mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV-GS and/or UL1678 standard in North America. B A 1. Lay a protective sheet on a table, which was wrapped around the display when it was packaged, beneath the screen surface so as not to scratch the screen face. 2.
PAGE 12
BDL3210Q / BDL4210Q / BDL4610Q 2. Parts and Functions 2.1. Control Panel 5 4 3 2 VOL INPUT MENU 1 1 POWER button Use this button to turn the display on or put the display to standby. 2 MENU button Use this button to turn on the OSD. 3 INPUT button Use this button to change input selection. 4 [ ] button Use this button to increase the audio output. 5 [ ] button Use this button to decrease to the audio output.
PAGE 13
BDL3210Q / BDL4210Q / BDL4610Q 2.2. Input/Output Terminals 1 5 1 2 6 7 3 8 9 4 10 11 HDMI 11 Connects to the HDMI output of an AV device or to the DVI-D output of a PC. (Using a DVI-HDMI cable/adapter). 2 VGA In Connects to the VGA output of a PC or media player. 3 YPbPr Component video input (YPbPr) for connecting to the component output of an AV device. 4 SPEAKER L/R Connects to the audio output of a AV device. 5 PC AUDIO Connects to the audio output of a computer.
PAGE 14
BDL3210Q / BDL4210Q / BDL4610Q 2.3. Remote Control 7 2.3.1. General functions 8 DVD 9 Blu-ray IPTV 3 6 4 9 10 7 8 10 Browse to options relevant with current action or selection. 13 12 14 15 13 INFO 22 16 23 17 18 24 19 14 FORMAT VOL P SLEEP Set time for display to power down automatically OK 25 OPTION 11 11 BACK Red key Demo menu (Digital crystal color, active control). OPTION SLEEP 12 Green key N/A. 2 MENU TV Blue key Sleep clock.
PAGE 15
BDL3210Q / BDL4210Q / BDL4610Q 29 HDMI1 Select the HDMI1 SOURCE. 30 HDMI2 Select the HDMI2 SOURCE. 31 HDMI3 N/A. 32 VGA Select the VGA SOURCE. 33 AV1 Select the AV1 SOURCE. 34 AV2 Select the AV2 SOURCE. 35 CVI Select the CVI SOURCE. 36 USB Connected USB device can be identified automatically. Select to browse the contents of the USB device in the main menu. No hotkey design is required for this on the remote control unit.
PAGE 16
BDL3210Q / BDL4210Q / BDL4610Q 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. To install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment. 3. Replace the cover. Caution: The incorrect use of batteries can result in leaks or bursting.
PAGE 17
BDL3210Q / BDL4210Q / BDL4610Q 3. Connecting External Equipment 3.1. Connecting External Equipment (DVD/VCR/VCD) 3.1.1. Using COMPONENT video input Audio Out COMPONENT Out (YPbPr) DVD / VCR / VCD [L] [COMPONENT IN] (YPbPr) [R] [AUDIO IN] 3.1.2.
PAGE 18
BDL3210Q / BDL4210Q / BDL4610Q 3.2. Connecting a PC 3.2.1. Using VGA input VGA Out D-Sub 15 pin PC [AUDIO IN] [VGA IN] 3.2.2.
PAGE 19
BDL3210Q / BDL4210Q / BDL4610Q 3.3. Connecting AV Equipment 3.3.1. Connecting an external AV device(AV IN 1) AV Out DVD / VCR / VCD [AV IN] 3.3.2.
PAGE 20
BDL3210Q / BDL4210Q / BDL4610Q 3.4. Connecting USB device Your display is fitted with a USB port that enables you to view photos, or play audio and video files stored on a USB storage device. USB Caution: The manufacturer is not responsible if the USB storage device is not supported, nor for any damage or loss of data caused by connecting your USB device. Supported format PHOTO: JPEG, BMP, PNG, GIF MUSIC: MP3, WMA, M4A, AAC, AC3 VIDEO: AVI, MP4, MOV, RM/RMVB USB operation 5.
PAGE 21
BDL3210Q / BDL4210Q / BDL4610Q 6. The display automatically sorts the files into 3 categories: Pictures, Music and Videos. Scroll [▲] or [▼] to choose the type of file to play, then press [OK] to enter. Folders Photo Music Video 7. To play the file (Picture, Music or Video), simply select the file you want to play by scroll [▲] or [▼] then press [OK]. 8. Disconnect USB device. Caution: Follow this procedure to avoid damage to your USB storage device. 1. Press the [BACK] key until exit the USB screen.
PAGE 22
BDL3210Q / BDL4210Q / BDL4610Q 4. OSD Menu 4.2. An overall view of the On-Screen Display (OSD) structure is shown below. You can use it as a reference for further adjusting your display. 4.1. OSD Menu Overview 4.2.1. Picture menu Navigating the OSD Menu 4.1.1. Navigating the OSD menu using the remote control Picture Reset Sound Contrast Preference Brightness Factory settings Color Temp. Picture format Picture shift SMART PICTURE Select preset picture setting.
PAGE 23
BDL3210Q / BDL4210Q / BDL4610Q 5. Input Mode VGA Resolution: BDL3210Q: Standard Resolution VGA WVGA SVGA XGA WXGA Active Resolution H Pixels V Lines 640 480 720 400 800 600 1024 768 1360 768 Refresh Rate Pixel Rate Aspect Ratio Refers to 60 Hz 70 Hz 60 Hz 60 Hz 60 Hz 31.5 MHz 31.3 MHz 37.9 MHz 48.3 MHz 47.
PAGE 24
BDL3210Q / BDL4210Q / BDL4610Q 6. Pixel Defect Policy We strive to deliver the highest quality products and use some of the industry’s most advanced manufacturing processes whilst practicing stringent quality control. However, pixel or sub-pixel defects on the PDP / TFT panels used in Plasma- & LCD- displays are sometimes unavoidable.
PAGE 25
BDL3210Q / BDL4210Q / BDL4610Q 6.4. Dark Dot Defects Black dot defects appear as pixels or sub-pixels that are always dark or “off ”. These are the examples of black dot defects: One dark dot 6.5.
PAGE 26
BDL3210Q / BDL4210Q / BDL4610Q 7. Cleaning and Troubleshooting 7.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display. The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes. Burns or personal injuries may occur if any body parts are brought too close.
PAGE 27
BDL3210Q / BDL4210Q / BDL4610Q 7.2. Troubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 1. Plug in the power cord. 2. The main power switch on the back of the display is not switched on. 2. Make sure the power switch is switched on. 3. The selected input has no connection. 3. Connect a signal connection to the display. 4. The display is in standby mode.
PAGE 28
BDL3210Q / BDL4210Q / BDL4610Q 8. Technical Specifications Display: Item Specifications BDL3210Q BDL4210Q BDL4610Q Screen size 31.5” 42” 46” Viewable size 31.5” 42” 46” Aspect ratio 16:9 16:9 16:9 1366x768 1920x1080 1920x1080 0.17025 x 0.51075 0.1615 x 0.4845 0.17675 x 0.53025 16.7M 16.7M 16.
PAGE 29
BDL3210Q / BDL4210Q / BDL4610Q General: Item Specifications Power Supply Power Consumption 100 ~ 240 VAC BDL3210Q: 100W BDL4210Q: 140W BDL4610Q: 160W Display Dimension [W x H x D] Without Stand (mm/inch) Gross Weight (kg/lbs) Net Weight (kg/lbs) BDL3210Q (mm/inch) 745.2 x 462.7 x 56.8 / 29.3 x 18.2 x 2.2 BDL4210Q (mm/inch) 978.2 x 593.1 x 56.9 / 38.5 x 23.4 x 2.2 BDL4610Q(mm/inch): 1065.9 x 643 x 56.6 / 42.0 x 25.3 x 2.2 Gross Weight BDL3210Q: 10.1 kg/22.27 lbs BDL4210Q: 17.6 kg/38.8 lbs BDL4610Q: 19.
PAGE 30
2012 © Koninklijke Philips Electronics N.V. All rights reserved. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips Electronics N.V. and are used under license from Koninklijke Philips Electronics N.V. Specifications are subject to change without notice.