26HFL5561L/27 26HFL5561V/27 32HFL5561D/27 32HFL5561L/27 32HFL5561V/27 32HFL4441D/27 32HFL4461F/27 37HFL4481F/27 37HFL5581D/27 37HFL5581L/27 37HFL5581V/27 42HFL5581L/27 42HFL5581V/27 52HFL5581L/27 52HFL5581V/27 EN User manual
1 2 3 Notice OSS declaration Important 3 3 Product information Safety Screen care and sterilization Environmental care 4 4 4 4 4 Your TV 5 Side controls and indicators 5 The guest remote control (optional) 6 The Philips Hospitality setup remote control (not included in box) 7 Enable or disable the remote control Enable standalone mode (Decryption control) Configure the control options 13 Configure different settings 17 17 19 14 Clone
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Notice 2010 © Koninklijke Philips Electronics N.V. All rights reserved. Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N.V. or their respective owners. Philips reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly. The material in this manual is believed adequate for the intended use of the system.
2 Important Registering your model with Philips makes you eligible for all of the valuable benefits listed below, so don’t miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/welcome to ensure: • Proof of Purchase Returning the enclosed card guarantees that your date of purchase is on file, so no additional paperwork is required from you to obtain warranty service.
Your TV Eng lis h 3 Congratulations on your purchase, and welcome to Philips! This set contains a lamp with mercury; please dispose of according to all local, state and federal laws. Philips pays a lot of attention to produce environment-friendly products in green focal areas. Your new TV contains materials which can be recycled and reused.
The guest remote control (optional) 21 20 19 18 17 16 Selects a channel or setting. m FORMAT 1 2 3 4 5 6 7 8 9 15 10 11 12 14 a 13 (Standby-On) Switches the product on or off. The product is not powered off completely unless it is physically unplugged. b CH GUIDE Accesses SmartGuide (see ‘Configure the control options’ on page 16), and/or list of channels. c PLAY* Starts or resumes play. d REW* Searches backward. e FF* Searches forward. f SMART PICTURE Launches the picture menu.
The Philips Hospitality setup remote control (not included in box) h CH +/- Eng lis h Switches to the next or previous channel. i Mutes or restores volume. j Miscellaneous buttons (Only E and A/V buttons are used.) POWER 17 16 15 14 E confirms an entry or selection. A/V displays the source list. 1 RECALL TEXT SMART SLEEP CC GUEST DCM SETUP 13 1 2 3 4 5 6 7 8 12 Accesses the Philips Hospitality setup menu. m RESET Not used.
4 SmartInstall Software 5 Philips TV can be completely configure quickly and easily using Philips SmartInstall software, available free of charge from your sales representative or from our website www.philips.com/hospitality. We recommend recommend this method for the quickest setup.
POWER RECALL TEXT SMART SLEEP CC SETUP SETUP 1 2 3 4 5 6 7 8 Note 9 CH M A/CH _ + 1 2 3 Enter the Philips Hospitality setup menu. Press to select a language. »» The setup and guest menus will now be displayed in the selected language. GUIDE 0 RESET M 1 2 Select a language •• You can choose English, Español or Français as your preferred language.
7 1 2 3 Select mode of communication Enter the Philips Hospitality setup menu. Press to select COMMUNICATION. Press to select one of the following options : • COMMUNICATION: To select the communication protocol between the TV and the external device connected to the TV. • STORE: To store the settings that are modified using the COMMUNICATION menu. • PENDANT: To enable or disable the healthcare pendant control. This is available only when you select COMMUNICATION > OFF.
1 2 3 4 5 6 Automatically install channels Enter the Philips Hospitality setup menu. Press to select CABLE TUNING. Press to select one of the following: • YES: To receive TV signals from a cable. • NO: To receive TV signals from an antenna. Press to select AUTO INSTALL TV > START. Press to start the automatic installation of channels. Press any key on the remote control to stop the automatic installation of channels. Note 9 What the guest or the user actually access are program numbers.
Select a source of input 1 2 3 CHANNEL INSTALL Enter the Philips Hospitality setup menu. Press to select CHANNEL INSTALL > INPUT. Press to select a source of input. CHANNEL INPUT CHANNEL LOGO DIGITAL DIGITAL CH SCROLL RF CHANNEL NUMBER MPEG PROGRAM NUMBER RINGS LABEL MUTE Note •• External inputs can also be assigned to a program number. Select a logo for a channel 1 2 3 4 5 Enter the Philips Hospitality setup menu. Press to select CHANNEL INSTALL > CHANNEL LOGO.
CHANNEL RINGS HIGH DEFINITION SPORTS NEWS KIDS MOVIES NETWORK EDUCATION LIFESTYLE HOSPITAL 5 6 7 (1X)(2 )(3 )(4 ) YES NO YES YES YES YES YES YES NO 1 2 Enter the Philips Hospitality setup menu. Press to select DIGITAL SETUP. »» Digital setup menu is displayed on your screen. You can configure the content ratings, closed caption and emergency alert settings. SIGNAL STRENGTH displays the signal strength of the selected channel in percentage.
Enable or disable emergency alert 1 2 3 Enter the Philips Hospitality setup menu. Press to select DIGITAL SETUP > EMERGENCY ALERT. Press to select one of the following options: • ALWAYS: To enable emergency alerts at all times. • SKIP LOW PRIORITY: To skip the emergency alerts of low priority. • SKIP MEDIUM LOW PRIORITY: To skip the emergency alerts of medium and low priorities. 11 Configure the switch-on settings 1 2 Enter the Philips Hospitality setup menu.
Configure the picture and sound settings 1 2 1 2 3 Enter the Philips Hospitality setup menu. Press to select CONFIGURATION > SWITCH ON / OSD > SWITCH ON PIC FMT. Press to select one of the available picture formats: »» The selected picture format is used to display pictures when the TV is turned on. 3 BRIGHTNESS COLOR CONTRAST SHARPNESS TINT ACTIVE CONTROL TREBLE BASS BALANCE AVL Enter the Philips Hospitality setup menu. Press to select CONFIGURATION > SWITCH ON / OSD > SWITCH ON CHANNEL.
12 Configure the security settings Enable standalone mode (Decryption control) 1 2 The premium HD content received by a satellite or cable is encrypted, using a digital rights management system (DRM) called Pro:Idiom®, to avoid piracy. The technology is embedded in the TV and prevents guests from pirating the content. To decrypt the content, follow the following steps: Enter the Philips Hospitality setup menu. Press to select CONFIGURATION > SECURITY > DECRYPTION CONTROL.
Press to select one of the following options: • ESP (Energy saving programmability): Set a time from 1 - 99 hours to enable ESP. If the TV does not receive any command for this time period, it enters the standby mode to save energy. Select OFF to disable ESP. • DIGIT TIMEOUT: Set a time between 1 - 9.9 seconds. When you press a key on your RC, the TV will wait for the specified time before assuming that you are finished entering digits, and switching to the entered channel.
3 Press to select one of the following options: • SMARTPOWER: To enable or disable the power saving mode. Select HIGH for maximum power savings. • LOW POWER STANDBY: To use minimum power when the TV is in standby mode. • SMARTCP: Select YES to enable the autosensing feature to switch to source where a video signal is plugged to a side I/O. Select NO to disable the autosensing feature and to you have to select the video source manually. • SMARTSECURE: See details in the note below.
14 Clone data (TV Setup Data) 1 2 3 Eng lis h STANDBY FIRMWARE: To download the TV startup data from the USB device. Only used in software download. • IBOARD NVM: To download the TV settings from the USB device. • IBOARD FIRMWARE: To update iboard software from the USB device. Only used in software download. • ALL: To download all the software upgrades from the USB device. • START: To start the software download. »» The TV will restart automatically upon the completion of software download.
15 Connect devices SW DOWNLOAD SOURCE DIRECTION CABLE TUNING RF CHANNEL RF TO TV RF RF TO TV YES 87 > This section describes how to connect various devices with different connectors and supplements examples provided in the Quick Start. Note •• Different types of connectors may be used to connect a device to your TV, depending on availability and your needs. A comprehensive interactive guide to help you connect your product is available at www. connectivityguide.philips.com.
Side connectors 1 USB 2 3 VIDEO 4 S-VIDEO 5 16 Troubleshooting This section describes commonly encountered issues and accompanying solutions. TV power on/ off issues The TV does not power on: •• Ensure that the TV is connected to the AC mains power outlet. If it does not power on, pull the plug out of the power outlet, wait for 60 seconds, plug it back and turn the TV on again. The TV does not switch on: •• Check that the TV controls are not locked.
•• Check the ESP setting and increase the time if you want the TV to stay on for longer duration (see ‘Configure the control options’ on page 16). The TV cannot be turned off: •• Check if the power mode has been set to FORCED ON. If it is, change selection to any other setting. No access to Philips Hospitality setup menu The Philips Hospitality setup mode cannot be accessed using the guest remote control: •• Check that the high-security mode has been turned off.
Eng lis h 1 2 3 4 5 x4 EN 23
© 2010 Koninklijke Philips Electronics N.V. All rights reserved.
