User manual Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 2 3 3 3 3 2 Your product 4 4 5 5 6 3 Connect 7 7 7 8 9 9 Safety Care for your product Care of the environment Compliance Help and support Main unit Remote control Connectors Wireless subwoofer Placement Pair up with the subwoofer Connect audio from TV Connect audio from other devices Connect digital devices through HDMI 4 Use your product 10 10 11 11 11 11 12 12 13 13 5 Update software Check software version Update software via USB 13 13 13 6 Product specifications 14
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. Safety Risk of electric shock or fire! • Before you make or change any connections, make sure that all devices are disconnected from the power outlet. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product.
• • • If you suspect that a battery has been swallowed or placed inside any part of the body, seek immediate medical attention. When you change the batteries, always keep all new and used batteries out of reach of children. Ensure that the battery compartment is completely secure after you replace the battery. If the battery compartment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer.
• find answers to frequently answered questions (FAQs) • email us a question • chat with our support representative. Follow the instructions on the website to select your language, and then enter your product model number. Alternatively, you can contact Consumer Care in your country. Before you contact, note down the model number and serial number of your product. You can find this information on the back or bottom of your product.
Remote control c This section includes an overview of the remote control. d Start, pause or resume play. e BASS +/Increase or decrease bass on the main unit. f Volume control • +/-: Increase or decrease volume. • : Mute or restore volume. a b l c d g Sound mode control VOICE: Select voice clarity sound mode. MUSIC: Select stereo sound mode. MOVIE: Select surround sound mode. h AUDIO SYNC +/Increase or decrease audio delay. e k f i DIM Set the brightness of the display panel for this product.
c USB • Connect to a USB storage device for audio media play. • Upgrade software of this product. d AUDIO IN Connect to an audio output on a device via AUDIO IN or AUX source (by pressing repeatedly AUDIO IN on the remote control). e DC IN Connect to the power supply. f OPTICAL IN Connect to an optical audio output on the TV or a digital device. Wireless subwoofer This product comes with a wireless subwoofer. a b c d a PAIRING (pairing) Press to to enter the pairing mode for the subwoofer.
3 Connect This section helps you connect this product to a TV and other devices. For information about the basic connections of this product and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product. •• Before you make or change any connections, make sure that all devices are disconnected from the power outlet. Placement See the quick start guide on how to place the subwoofer vertically or horizontally.
2 Note •• If the wireless dis-connection or pairing up lasts 1 minute, the subwoofer automatically switches to standby and the LED on the subwoofer turns off. Connect audio from TV Connect this product to a TV. You can listen to audio from TV programs through the speakers of this product. Option 1: Connect to TV through HDMI (ARC) Best quality audio This product supports HDMI with Audio Return Channel (ARC).
Option 3: Connect to TV through analog audio cables 1 Basic quality audio AUDIO OUT L R TV 2 1 2 Using an analog cable, connect the AUDIO IN (3.5mm jack) on this product to the analog audio output (red and white) on the TV. • The analog audio output on the external device might be labeled AUDIO OUT. Using an optical cable, connect the OPTICAL IN connector on this product to the optical output on the external device.
• • 1 2 3 4 video is automatically displayed on your TV, and audio is automatically played on this product. Using a High Speed HDMI cable, connect the HDMI OUT connector on your digital device to the HDMI IN on this product. • A High Speed HDMI cable is recommended. Connect this product to TV through HDMI OUT (ARC). On the connected device, turn on HDMICEC operations. Press HDMI IN on the remote control of this product to enable the HDMI IN connection.
View clock • 1 • In ECO standby or operation mode, press . »» In ECO standby mode, the clock is displayed for 1 minute, then the display is switched off. »» In operation mode, the clock is displayed 10 seconds, then the display is switched to the current source information. Note • Press MOVIE to create a surround listening experience. Ideal for watching movie. Press MUSIC to create two-channel or multichannel stereo. Ideal for listening to music.
What you need • A Bluetooth device which supports Bluetooth profile A2DP, AVRCP and with Bluetooth version as 4.1. • The maximum operational range between this product and a Bluetooth device is approximately 10 meters (30 feet). 1 2 3 4 5 Press on the remote control to switch this product to Bluetooth mode. »» BT is displayed on the display panel, blinking. Connect your MP3 player to play your audio files or music. What you need • An MP3 player. • A 3.5mm stereo audio cable. 1 Using the 3.
Note •• This product may not be compatible with certain types 5 Update software of USB storage device. •• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized. •• Digital camera PTP and MTP protocols are not supported. •• Do not remove the USB storage device while it is being read. •• DRM-protected music files (MP3) are not supported. •• Support a USB port: 5V , 1A.
5 6 7 On the remote control, within 6 seconds press twice then Volume + once, and then hold down MOVIE. »» Then "UPG" (upgrade) is displayed on the display panel. »» If a USB flash drive is not connected or invalid upgrade file is found, "ERROR" (error) is displayed on the display panel. When “UPG” blinks, press on the remote control to start the upgrade. Wait until the upgrade is completed. »» If the upgrade is complete, this product automatically turns off and on again.
•• •• •• •• Standby with clock display: ≤ 1 W Dimensions (W x H x D): 408 x 56.7 x 115 mm Weight: 1.3 kg Built-in speakers • 2 x mylar tweeter (25mm/1", 8 ohm) • 4 x racetrack full-range speaker (94.2mm/3.7” x 35.2mm/1.4”, 8 ohm) for front/surround channel Subwoofer • • • • • • • Power supply: 220-240 V~, 50-60 Hz Power consumption: 60 W Standby power consumption: ≤ 0.5 W Impedance: 3 ohm Speaker drivers: 69.4mm/2.9” x 201.5mm/7.9” woofer Dimensions (W x H x D): 430 x 85.5 x 538.5 mm Weight: 6.
Error message is displayed on the display panel. • When "ERROR" is displayed, it indicates that an input audio format is not supported. • When "ARC" blinks, it indicates that the connected TV is not HDMI ARC compliant or an unsupported audio format is detected. Bluetooth A device cannot connect with this product. • The device does not support the compatible profiles required for this product. • You have not enabled the Bluetooth function of the device.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Digital Surround is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
Specifications are subject to change without notice The Philips trademark and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. 2016 © Gibson Innovations Limited. All rights reserved. This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. B1_12_UM_V2.
