English page 2 Figures page 82,83,84,85 Guarantee and service sages 86,8788 Francis page 11 Figures page Quarantine et service aprons-vente pages 86,8788 Putsch Semite Ambulate Beaten 20,30 Abbitdungen Semite Guaranteeing tnd Service Intense Netherlands paginate Figure patina Quarantine én service: vagina's 86,87,88 Espalier paginate Figures patinas Niagara vaginas 86,87,88 totalitarian patina 47 Figure patine 52,83,84,85 Niagara e envision paging 85,8769 Summit sinus 56 Kumquat i 82,63,84,95 Takeouts js to
+ Make sure that the units switched off (POWER’ switch () ot pressed inf). « Select the Loudspeaker to be connected (e.g. the left, ). o Tenn put the marked wire into the red 'L terminal and the non-marked wire into the black 'L terminal. * inexactly the same way, connect the wires of the other loudspeaker {the right, R) with the two other terminals. o Check that alf connections have been made correctly: * Insulated wires must not touch {short circuital.
& FATE function selection button. For play from deck (= recorder} 'HIGH SPEED DUBBING' dubbing speed selector. For defecting normal or high gape speed when copying a tape from deck MONORAIL switch MONO (pressed in): play is in mono and any stereo noise resulting from a weak stereo reception is greatly reduced, Normal this bitten should be left In the 'stereo’ position (ot pressed in). For the RIF function, see section on "Recording’. & CD buttons: « 'PROGRAM for storing {or erasing) the tracks in a program.
fE 'REPEAT button Faro operating the CD auto changer (same function as GRAM’ button For programming preset transmitters (same function the C auto changer (same function as MUTE button For brief interruption of the sound, AMPLIFIER 1. Switch on the unit using the on/off switch The display @ should now light up, 2.
remote control handset by selecting the second figure within 2 seconds after pressing the 1 for the ten, « Press PRIG (or i, The P~ indication appears an the display. The frequency has now been programmed. Note: « The memory information can be (ost ¥ the unit is not used regularly. If tis happens, the tuner must be reprogrammed. Tuning to preset transmitters Select the number the desired transmitter swing bunions @ and @ {or using buttons [5] on the remote control handset).
The track will be started again. Searching for a passage during play » Hold "« SEARCH’ searcher @year on ihe resole control handset pressed down to search for the required passage within the track that's playing. #you release the bunion, play wil continue. Repeating play » Before or during play press ‘REPEAT the remote control handset). The repeat indication "’ lights up. ~ All discs are played and then repeated, # Press REPEAT again to stopiherepeatfunction. The "repeal indication '’ goes out.
Reviewing the program » Press ‘REVIEW @. Ali track numbers appear in the programmed order on the display, IF "Eer* appears on the display, nothing has been stored. Erasing track from the program or erasing an entire program « Press ‘REVIEW' @. Ali rack numbers appear in the programmed order on the display. « Press ‘PROGRAM’ the remote contra handset) as 500n as the track number you wish to erase appears.
1. Select compact disc mode by pressing the COMPACT iSO’ function selection button . 2. Prepare deck A for according, i 2. place a cassette in the compartment and press the ‘REGARD' bunion & The cassette deck does not start yet. 3. Place a Ch in the player and if required programmer the €D player. 4. By pressing the 'PLAY/PAUSE’ button 63 on the CD player, start the player. The cassette will start automatically when the first rack is reached.
» Placing loudspeakers behind objects furniture, sun blinds, curtains, ete} has an unfavorable effect on treble reproduction. * Try o keep the arrangement as symmetrical as possible, this also applies (o the height positioning. Further information required for making a tape recording: ® Each recording automatically erases any previous recording on the pale. « The position of the volume, balance and teen contrails does not influence the recordings.
