Important Information Manual

Problem Possible cause Solution
The suction
power is
insufcient.
The dust container is
full.
Empty the dust container.
The lters are dirty. Clean or replace the lters.
The suction power is
set to a low setting.
Increase the suction power with the regulator on
the appliance or on the handgrip.
The nozzle, tube or
hose is blocked up.
To remove the obstruction, disconnect the blocked-up
item and connect it (as far as possible) the other way
around. Switch on the vacuum cleaner to force the air
through the blocked-up item in opposite direction.
When I use my
vacuum cleaner I
sometimes feel
electric shocks.
Your vacuum cleaner
builds up static
electricity. The lower
the air humidity, the
more static electricity
the appliance builds up.
Discharge the appliance by frequently holding the
tube against other metal objects in the room (for
example the legs of a table or chair, a radiator etc.).
You can also raise the air humidity level in the room.
The infrared
remote control
does not
function.
The batteries do not
make full contact or
have not been inserted
properly.
Remove the lid of the battery compartment and
insert the batteries correctly. Make sure the - and +
poles point in the right direction.
The batteries are
empty.
Replace the batteries. You can continue to vacuum
but you cannot use the remote control to increase
or decrease the suction power or to switch off the
appliance. To switch off the appliance, press the on/
off button on the appliance.
6
ENGLISH
4222_003_3657_4_DFU_Booklet_A5_v4.indd 6 14/05/14 14:15