User manual

Attaching the nozzle and accessories
1 To connect the nozzle or an accessory to the tube, press the spring-
loaded lock button (1) on the tube and insert the tube into the oor
nozzle (2). Fit the spring-loaded lock button into the opening in the
nozzle (‘click’).
Note: You can also connect the nozzle or accessories directly to the handgrip in
the same way.
2 To disconnect the nozzle or an accessory from the tube, press the
spring-loaded lock button and pull the nozzle out of the tube.
Hose
1 To connect the hose, push it rmly into the appliance (‘click’).
Note: Make sure that the projection of the hose ts into the recesses.
2 To disconnect the hose, push the buttons (1) and pull the hose out
of the appliance (2).
Telescopic tube
Note: Adjust the length of the tube so that the hand holding the handgrip is at
hip level.
ENGLISH10
4222.003.3433.1.indd 10 11-11-09 15:40