User manual

2 TakeouttheHEPA13lter.
3 Putthenewlterintheappliance.
4 Presstheltergrillehometolockit(‘click’).
Note: Make sure that the lter grille is properly closed.
Tip: For optimal results, replace the HEPA 13 lter every 2 years. If you want
to minimise the impact on the environment, you can wash the HEPA 13 lter.
To wash the HEPA 13 lter, follow the instructions below.
1 Rinse the HEPA 13 lter under a hot slow-running tap.
Nevercleanthelterwithabrush.
2 Carefully shake the water from the surface of the lter. Let the lter
dry completely for at least 2 hours before you put it back into the
vacuum cleaner.
Note: Cleaning does not restore the original colour of the lter, but does restore
its ltration power.
Ordering accessories
If you have any difculties obtaining dustbags, lters or other accessories
for this appliance, please contact the Philips Consumer Care Centre in your
country or consult the worldwide guarantee leaet.
Ordering dustbags
- Philips s-bag
®
ultra long performance dustbag lasts 80% longer
than standard dustbags. Their 5 litres capacity and multi-layer, non-
clogging material maintain excellent suction power throughout the
entire lifetime of the bag. Available under type number FC8027.
- Philips s-bag
®
classic long performance dustbags last 50% longer
than standard dustbags, thanks their non-clogging material. Available
under type number FC8021.
ENGLISH 13