User manual

Motor protection lter
To guarantee optimal performance, replace the motor protection lter
once a year.
1 Remove the dustbag holder with the dustbag.
2 Pressthelterholderreleasetab(1)andtakethelterholderout
oftheappliance(2).Takethemotorprotectionlteroutofthe
lterholder.
3 Putthenewlterinthelterholder.Fitthetwolugsofthelter
holderbehindtheridgeatthebottomtoensurethatittsproperly
atthetop(1).Thenpresshomethelterholder(‘click’)(2).
4 Place the dustbag holder with the dustbag back into the appliance.
HEPA 13 lter
The HEPA 13 lter is able to remove 99.95% of all particles down to
0.0003mm in size from the outlet air. This not only includes normal house
dust, but also harmful microscopic vermin such as dust mites and their
excrements, which are well-known causes of respiratory allergies.
Note: To guarantee optimal dust retention and performance of the vacuum
cleaner, always replace the HEPA lter every 2 years with an original Philips
lter of the correct type (see chapter ‘Ordering accessories’). You can dispose of
the old lter with the normal household waste.
Replacing the HEPA 13 lter
1 Opentheltergrille.
ENGLISH12