User manual
6 Placethedustbucketbackintotheapplianceandputthelidwiththeairlterbackontothe
dustbucket(Fig.17).
7 Closethecover(Fig.18).
8 Toconnectthehose,pushitrmlyintotheappliance(‘click’)(Fig.2).
9Pullthecordoutoftheapplianceandputthemainspluginthewallsocket.
10 Presstheon/offbuttonontopoftheappliancetoswitchontheappliance(Fig.19).
11 Ifyouwanttopauseforamoment,inserttheridgeonthenozzleintotheparkingslotto
parkthetubeinaconvenientposition(Fig.20).
Cleaning and maintenance
Alwaysunplugtheappliancebeforeyoucleanorreplacethelters.
Dust bucket and AquaWeb
Clean the dust bucket and AquaWeb after every vacuuming session.
1 Switchoffandunplugtheappliance(Fig.19).
2 Pressthereleasebutton(1)toremovethehose(2)(Fig.3).
3 Openthecover(Fig.13).
4 Grabthehandleoftheairlterandliftthelidoffthedustbucket(Fig.14).
5Putthehandleofthedustbucketinuprightposition(1).Liftthedustbucketoutofthe
appliance(2)(Fig.15).
6 Emptythedustbucketintothesink(Fig.21).
Tip: You can use the AquaWeb as a drainer.
7 RemovetheAquaWebfromthedustbucketandcleanitunderthetap(Fig.22).
8 Empty,cleananddrythedustbucket(Fig.23).
9DrytheAquaWebwithacleanclothorletitdryontheairbeforeyouputitbackintothe
dustbucket(Fig.24).
10 Placethedustbucketbackintotheapplianceandputthelidwiththeairlterbackontothe
dustbucket(Fig.17).
11 Closethecover(Fig.18).
Washable Ultra Clean Air HEPA 13 exhaust lter
Clean the washable Ultra Clean Air HEPA 13 lter every 6 months. The lter can be cleaned
4 times. After these 4 times, the lter has to be replaced. Replace the washable Ultra Clean Air
HEPA 13 lter with a Philips lter of the correct type (see chapter ‘Ordering accessories’).
1 Switchoffandunplugtheappliance(Fig.19).
2 RemovetheHEPAexhaustltergrilleandremovethewashableUltraCleanAirHEPA13
exhaustlterfromtheappliance(Fig.25).
Note: Do not remove the silencer behind the washable Ultra Clean Air HEPA 13 exhaust lter. You do not
have to clean this part.
ENGLISH 9










