User manual
The mini turbo brush can be attached to the handgrip of the hose or to the telescopic tube.
1 To attach the mini turbo brush, insert it into the handgrip or the telescopic tube and turn a
little.
2 To detach the mini turbo brush, pull it out of the handgrip or the telescopic tube while
turning it a little.
1 Pull the cord out of the appliance and put the mains plug in the wall socket.
2 Press the on/off button on top of the appliance to switch on the appliance (Fig. 16).
Tip: To avoid bending your back, press the on/off button with your foot.
3 If you want to park the tube for a moment during vacuum cleaning, insert the ridge on the
nozzle into the parking slot (Fig. 17).
4 To ensure stable parking of the telescopic tube, adjust the tube to the shortest length.
5 To switch off the appliance, press the on/off button on top of the appliance.
1 During vacuum cleaning, you can adjust the suction power with the selection wheel on top of
the appliance (Fig. 18).
- Use maximum suction (+) power to vacuum very dirty carpets and hard oors.
- Use minimum suction power (-) to vacuum curtains, tablecloths etc.
2 Specic types only: You can also adjust the suction power with the suction power slide on the
handgrip (Fig. 19).
1 Switch off the appliance and remove the mains plug from the wall socket.
2 Press the cord rewind button to rewind the mains cord (Fig. 20).
3 Specic types only: Always put the Tri-Active nozzle in the carpet setting when you store it.
This prevents the side brushes from becoming bent (Fig. 12).
4 Put the appliance in upright position. To attach the nozzle to the appliance, insert the ridge on
the nozzle into the storage slot (Fig. 21).
To ensure stable storage of the telescopic tube, adjust the tube to the shortest length.
Always unplug the appliance before you replace the disposable dustbag or empty the reusable
dustbag.
- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i.e.
even when the nozzle is not placed on the oor (Fig. 22).
1 Pull the cover upwards to open it (Fig. 23).
2 Lift the dustbag holder out of the appliance (Fig. 24).
Make sure you hold the dustbag upright when you lift it out of the appliance.
3 Pull at the cardboard tag to remove the full dustbag from the holder (Fig. 25).
, When you do this, the dustbag is sealed automatically.
9










